M467: Adjust UART pinmap to pass FPGA CI Test Shield test

Author: ccli8

targets/TARGET_NUVOTON/TARGET_M460/PeripheralPins.c

@@ -335,10 +335,18 @@ const PinMap PinMap_UART_TX[] = {
     {PA_14, UART_0, SYS_GPA_MFP3_PA14MFP_UART0_TXD},
     {PB_1, UART_2, SYS_GPB_MFP0_PB1MFP_UART2_TXD},
     {PB_3, UART_1, SYS_GPB_MFP0_PB3MFP_UART1_TXD},
+#if COMPONENT_FPGA_CI_TEST_SHIELD && TARGET_NUMAKER_IOT_M467
+    /* Swap the sequence to pass FPGA CI Test Shield tests */
+    {PB_5, UART_5, SYS_GPB_MFP1_PB5MFP_UART5_TXD},
+    {NU_PINNAME_BIND(PB_5, UART_5), UART_5, SYS_GPB_MFP1_PB5MFP_UART5_TXD},
+    {PB_5, UART_2, SYS_GPB_MFP1_PB5MFP_UART2_TXD},
+    {NU_PINNAME_BIND(PB_5, UART_2), UART_2, SYS_GPB_MFP1_PB5MFP_UART2_TXD},
+#else
     {PB_5, UART_2, SYS_GPB_MFP1_PB5MFP_UART2_TXD},
     {NU_PINNAME_BIND(PB_5, UART_2), UART_2, SYS_GPB_MFP1_PB5MFP_UART2_TXD},
     {PB_5, UART_5, SYS_GPB_MFP1_PB5MFP_UART5_TXD},
     {NU_PINNAME_BIND(PB_5, UART_5), UART_5, SYS_GPB_MFP1_PB5MFP_UART5_TXD},
+#endif
     {PB_7, UART_1, SYS_GPB_MFP1_PB7MFP_UART1_TXD},
     {PB_9, UART_0, SYS_GPB_MFP2_PB9MFP_UART0_TXD},
     {NU_PINNAME_BIND(PB_9, UART_0), UART_0, SYS_GPB_MFP2_PB9MFP_UART0_TXD},
@@ -466,10 +474,18 @@ const PinMap PinMap_UART_RX[] = {
     {PA_15, UART_0, SYS_GPA_MFP3_PA15MFP_UART0_RXD},
     {PB_0, UART_2, SYS_GPB_MFP0_PB0MFP_UART2_RXD},
     {PB_2, UART_1, SYS_GPB_MFP0_PB2MFP_UART1_RXD},
+#if COMPONENT_FPGA_CI_TEST_SHIELD && TARGET_NUMAKER_IOT_M467
+    /* Swap the sequence to pass FPGA CI Test Shield tests */
+    {PB_4, UART_5, SYS_GPB_MFP1_PB4MFP_UART5_RXD},
+    {NU_PINNAME_BIND(PB_4, UART_5), UART_5, SYS_GPB_MFP1_PB4MFP_UART5_RXD},
+    {PB_4, UART_2, SYS_GPB_MFP1_PB4MFP_UART2_RXD},
+    {NU_PINNAME_BIND(PB_4, UART_2), UART_2, SYS_GPB_MFP1_PB4MFP_UART2_RXD},
+#else
     {PB_4, UART_2, SYS_GPB_MFP1_PB4MFP_UART2_RXD},
     {NU_PINNAME_BIND(PB_4, UART_2), UART_2, SYS_GPB_MFP1_PB4MFP_UART2_RXD},
     {PB_4, UART_5, SYS_GPB_MFP1_PB4MFP_UART5_RXD},
     {NU_PINNAME_BIND(PB_4, UART_5), UART_5, SYS_GPB_MFP1_PB4MFP_UART5_RXD},
+#endif
     {PB_6, UART_1, SYS_GPB_MFP1_PB6MFP_UART1_RXD},
     {PB_8, UART_0, SYS_GPB_MFP2_PB8MFP_UART0_RXD},
     {NU_PINNAME_BIND(PB_8, UART_0), UART_0, SYS_GPB_MFP2_PB8MFP_UART0_RXD},