add BIOS+GPT install

Author: ryosukeeeeee

docs/advanced/troubleshooting.md

@@ -2,6 +2,14 @@
 
 本节描述一些在日常使用过程中你有很大概率可能遇到的问题，并提供解决方法。
 
+### 使用 BIOS+GPT 模式安装 Arch Linux
+
+虽然使用传统 BIOS 模式安装的场景已经越来越少，但是在某些特殊场景，如在 VPS 上安装 Arch Linux,可能依然需要使用到 BIOS 模式。本小节讲述在使用 BIOS+GPT 模式安装时，与 UEFI+GPT 模式安装的不同点，其中绝大多数步骤是相同的。
+
+- 安装前，在主板的 BIOS 设置中，或在 VPS 的启动设置中(如有)，将启动模式调整为传统 BIOS 模式启动。
+- 在分区时，需要额外分出一个 2M 大小的 BIOS boot 模式的分区，此分区无需进行格式化与挂载。
+- 在安装引导程序时，对应的命令修改为: `grub-install --target=i386-pc /dev/vda` 以及 `grub-mkconfig -o /boot/grub/grub.cfg`。其中，第一条命令中的`/dev/vda`为安装 GRUB 的磁盘，而非分区。具体的名字根据安装者的实际情况进行更改。
+
 ### 鼠标出现按键不灵敏或失灵的现象
 
 一般来说大多数鼠标都是即插即用的，但 5.14 内核前后更新后可能遇到失灵的情况。根据自身鼠标品牌安装对应的驱动即可解决。[[1]](https://openrazer.github.io/#arch)
@@ -79,3 +87,9 @@ qdbus org.kde.KWin /Compositor resume   #开启
 ```
 sudo intel_panel_fitter -p A -x 1230 -y 700
 ```
+
+---
+
+## Ref
+
+- [[1]GUID 分区表*(GPT)*特殊操作](<https://wiki.archlinux.org/title/GRUB_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87)#GUID%E5%88%86%E5%8C%BA%E8%A1%A8_(GPT)_%E7%89%B9%E6%AE%8A%E6%93%8D%E4%BD%9C>)

docs/uk/advanced/troubleshooting.md

@@ -2,6 +2,14 @@
 
 This section describes some of the problems that you are likely to encounter in daily use, and provides solutions.
 
+### Install Arch Linux using BIOS+GPT mode
+
+Although there are fewer and fewer installation scenarios using traditional BIOS mode, in some special scenarios, such as installing Arch Linux on a VPS, it may still be necessary to use BIOS mode. This section describes the differences between installing in BIOS+GPT mode and UEFI+GPT mode, and most of the steps are the same.
+
+- Before installation, in the motherboard's BIOS settings, or in the VPS's boot settings (if any), adjust the boot mode to Legacy BIOS mode boot.
+- When partitioning, you need to separate a 2M BIOS boot mode partition, this partition does not need to be formatted and mounted.
+- When installing the bootloader, the corresponding commands are modified to: `grub-install --target=i386-pc /dev/vda` and `grub-mkconfig -o /boot/grub/grub.cfg`. Among them, `/dev/vda` in the first command is the disk where GRUB is installed, not a partition. The specific name is changed according to the actual situation of the installer.
+
 ### The mouse button is insensitive or malfunctioning
 
 Generally speaking, most mice are plug and play, but may experience failure after the 5.14 kernel update. It can be solved by installing the corresponding driver according to your own mouse brand. [[1]](https://openrazer.github.io/#arch)
@@ -79,3 +87,9 @@ When connecting some old-fashioned display devices, the phenomenon of [overscan]
 ```
 sudo intel_panel_fitter -p A -x 1230 -y 700
 ```
+
+---
+
+## Ref
+
+- [[1]GUID 分区表*(GPT)*特殊操作](<https://wiki.archlinux.org/title/GRUB_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87)#GUID%E5%88%86%E5%8C%BA%E8%A1%A8_(GPT)_%E7%89%B9%E6%AE%8A%E6%93%8D%E4%BD%9C>)