Update defconfig.esp32c5

Author: Jason2866

configs/defconfig.esp32c5

@@ -1,21 +1,53 @@
+#
+# Bluetooth
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BT_BLE_BLUFI_ENABLE=y
+CONFIG_BT_STACK_NO_LOG=y
+# CONFIG_BT_BLE_42_FEATURES_SUPPORTED is not set
+# CONFIG_BLE_MESH is not set
+CONFIG_BT_NIMBLE_ENABLED=y
+CONFIG_BT_NIMBLE_LOG_LEVEL_NONE=y
+CONFIG_BT_NIMBLE_MAX_CONNECTIONS=1
+# CONFIG_BT_NIMBLE_NVS_PERSIST is not set
+# CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS is not set
+# CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY is not set
+# CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY is not set
+# CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT is not set
+
+CONFIG_BT_CTRL_MODEM_SLEEP=y
+CONFIG_BT_CTRL_MODEM_SLEEP_MODE_1=y
+CONFIG_BT_CTRL_LPCLK_SEL_MAIN_XTAL=y
+# CONFIG_BT_CTRL_LPCLK_SEL_RTC_SLOW is not set
+CONFIG_BT_LOG_HCI_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BTM_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_SDP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_GAP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BNEP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_PAN_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_A2D_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_AVDT_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_AVCT_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_AVRC_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_MCA_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_HID_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_APPL_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_GATT_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_SMP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BTIF_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BTC_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_OSI_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_NONE=y
 CONFIG_RTC_CLK_CAL_CYCLES=576
 # CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 is not set
 CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
+
 # This Enables RISCV LP - but it can't be used within Arduino at this time. 
 #CONFIG_ULP_COPROC_ENABLED=y
 #CONFIG_ULP_COPROC_LP_CORE=y
 #CONFIG_ULP_COPROC_RESERVE_MEM=4096
 
-#
-# OpenThread
-#
-# CONFIG_OPENTHREAD_ENABLED is not set
-# Border Router disabled
-# CONFIG_OPENTHREAD_BORDER_ROUTER is not set
-# CONFIG_OPENTHREAD_RADIO_SPINEL_UART is not set
-
 #
 # Zigbee
 #