diff --git a/.github/workflows/bsp_buildings.yml b/.github/workflows/bsp_buildings.yml index 35592a75df1..73a5dea700b 100644 --- a/.github/workflows/bsp_buildings.yml +++ b/.github/workflows/bsp_buildings.yml @@ -192,6 +192,7 @@ jobs: - "stm32/stm32f767-st-nucleo" - "stm32/stm32f769-st-disco" - "stm32/stm32f723-st-disco" + - "stm32/stm32g030-tiny-board" - "stm32/stm32g070-st-nucleo" - "stm32/stm32g071-st-nucleo" - "stm32/stm32g431-st-nucleo" diff --git a/bsp/stm32/stm32g030-tiny-board/.config b/bsp/stm32/stm32g030-tiny-board/.config new file mode 100644 index 00000000000..b1c820c800f --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/.config @@ -0,0 +1,1282 @@ +CONFIG_SOC_STM32G030RB=y +CONFIG_BOARD_STM32G030_TINY_BOARD=y + +# +# RT-Thread Kernel +# + +# +# klibc options +# + +# +# rt_vsnprintf options +# +CONFIG_RT_KLIBC_USING_LIBC_VSNPRINTF=y +# end of rt_vsnprintf options + +# +# rt_vsscanf options +# +CONFIG_RT_KLIBC_USING_LIBC_VSSCANF=y +# end of rt_vsscanf options + +# +# rt_memset options +# +# CONFIG_RT_KLIBC_USING_USER_MEMSET is not set +# CONFIG_RT_KLIBC_USING_LIBC_MEMSET is not set +# CONFIG_RT_KLIBC_USING_TINY_MEMSET is not set +# end of rt_memset options + +# +# rt_memcpy options +# +# CONFIG_RT_KLIBC_USING_USER_MEMCPY is not set +# CONFIG_RT_KLIBC_USING_LIBC_MEMCPY is not set +# CONFIG_RT_KLIBC_USING_TINY_MEMCPY is not set +# end of rt_memcpy options + +# +# rt_memmove options +# +# CONFIG_RT_KLIBC_USING_USER_MEMMOVE is not set +# CONFIG_RT_KLIBC_USING_LIBC_MEMMOVE is not set +# end of rt_memmove options + +# +# rt_memcmp options +# +# CONFIG_RT_KLIBC_USING_USER_MEMCMP is not set +# CONFIG_RT_KLIBC_USING_LIBC_MEMCMP is not set +# end of rt_memcmp options + +# +# rt_strstr options +# +# CONFIG_RT_KLIBC_USING_USER_STRSTR is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRSTR is not set +# end of rt_strstr options + +# +# rt_strcasecmp options +# +# CONFIG_RT_KLIBC_USING_USER_STRCASECMP is not set +# end of rt_strcasecmp options + +# +# rt_strncpy options +# +# CONFIG_RT_KLIBC_USING_USER_STRNCPY is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRNCPY is not set +# end of rt_strncpy options + +# +# rt_strcpy options +# +# CONFIG_RT_KLIBC_USING_USER_STRCPY is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRCPY is not set +# end of rt_strcpy options + +# +# rt_strncmp options +# +# CONFIG_RT_KLIBC_USING_USER_STRNCMP is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRNCMP is not set +# end of rt_strncmp options + +# +# rt_strcmp options +# +# CONFIG_RT_KLIBC_USING_USER_STRCMP is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRCMP is not set +# end of rt_strcmp options + +# +# rt_strlen options +# +# CONFIG_RT_KLIBC_USING_USER_STRLEN is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRLEN is not set +# end of rt_strlen options + +# +# rt_strnlen options +# +# CONFIG_RT_KLIBC_USING_USER_STRNLEN is not set +# end of rt_strnlen options + +# CONFIG_RT_UTEST_TC_USING_KLIBC is not set +# end of klibc options + +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_NANO is not set +# CONFIG_RT_USING_SMART is not set +# CONFIG_RT_USING_AMP is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_CPUS_NR=1 +CONFIG_RT_ALIGN_SIZE=8 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=1000 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_HOOK_USING_FUNC_PTR=y +# CONFIG_RT_USING_HOOKLIST is not set +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set +# CONFIG_RT_USING_CPU_USAGE_TRACER is not set + +# +# kservice options +# +# CONFIG_RT_USING_TINY_FFS is not set +# end of kservice options + +CONFIG_RT_USING_DEBUG=y +CONFIG_RT_DEBUGING_ASSERT=y +CONFIG_RT_DEBUGING_COLOR=y +CONFIG_RT_DEBUGING_CONTEXT=y +# CONFIG_RT_DEBUGING_AUTO_INIT is not set +# CONFIG_RT_USING_CI_ACTION is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_MESSAGEQUEUE_PRIORITY is not set +# CONFIG_RT_USING_SIGNALS is not set +# end of Inter-Thread communication + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_MEMHEAP is not set +CONFIG_RT_USING_SMALL_MEM_AS_HEAP=y +# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set +# CONFIG_RT_USING_SLAB_AS_HEAP is not set +# CONFIG_RT_USING_USERHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +# CONFIG_RT_USING_MEMTRACE is not set +# CONFIG_RT_USING_HEAP_ISR is not set +CONFIG_RT_USING_HEAP=y +# end of Memory Management + +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +# CONFIG_RT_USING_THREADSAFE_PRINTF is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="uart1" +CONFIG_RT_VER_NUM=0x50200 +# CONFIG_RT_USING_STDC_ATOMIC is not set +CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32 +# end of RT-Thread Kernel + +CONFIG_ARCH_ARM=y +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M0=y + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=1024 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 +# CONFIG_RT_USING_LEGACY is not set +CONFIG_RT_USING_MSH=y +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=768 +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_CMD_SIZE=80 +CONFIG_MSH_USING_BUILT_IN_COMMANDS=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_ARG_MAX=10 +CONFIG_FINSH_USING_OPTION_COMPLETION=y + +# +# DFS: device virtual file system +# +# CONFIG_RT_USING_DFS is not set +# end of DFS: device virtual file system + +# CONFIG_RT_USING_FAL is not set + +# +# Device Drivers +# +# CONFIG_RT_USING_DM is not set +# CONFIG_RT_USING_DEV_BUS is not set +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_UNAMED_PIPE_NUMBER=64 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +CONFIG_RT_USING_SERIAL_V1=y +# CONFIG_RT_USING_SERIAL_V2 is not set +CONFIG_RT_SERIAL_USING_DMA=y +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_SERIAL_BYPASS is not set +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_CPUTIME is not set +# CONFIG_RT_USING_I2C is not set +# CONFIG_RT_USING_PHY is not set +# CONFIG_RT_USING_PHY_V2 is not set +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_DAC is not set +# CONFIG_RT_USING_NULL is not set +# CONFIG_RT_USING_ZERO is not set +# CONFIG_RT_USING_RANDOM is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +# CONFIG_RT_USING_SPI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_LCD is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_WIFI is not set +# CONFIG_RT_USING_BLK is not set +# CONFIG_RT_USING_VIRTIO is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_KTIME is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CHERRYUSB is not set +# end of Device Drivers + +# +# C/C++ and POSIX layer +# + +# +# ISO-ANSI C layer +# + +# +# Timezone and Daylight Saving Time +# +# CONFIG_RT_LIBC_USING_FULL_TZ_DST is not set +CONFIG_RT_LIBC_USING_LIGHT_TZ_DST=y +CONFIG_RT_LIBC_TZ_DEFAULT_HOUR=8 +CONFIG_RT_LIBC_TZ_DEFAULT_MIN=0 +CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0 +# end of Timezone and Daylight Saving Time +# end of ISO-ANSI C layer + +# +# POSIX (Portable Operating System Interface) layer +# +# CONFIG_RT_USING_POSIX_FS is not set +# CONFIG_RT_USING_POSIX_DELAY is not set +# CONFIG_RT_USING_POSIX_CLOCK is not set +# CONFIG_RT_USING_POSIX_TIMER is not set +# CONFIG_RT_USING_PTHREADS is not set +# CONFIG_RT_USING_MODULE is not set + +# +# Interprocess Communication (IPC) +# +# CONFIG_RT_USING_POSIX_PIPE is not set +# CONFIG_RT_USING_POSIX_MESSAGE_QUEUE is not set +# CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE is not set + +# +# Socket is in the 'Network' category +# +# end of Interprocess Communication (IPC) +# end of POSIX (Portable Operating System Interface) layer + +# CONFIG_RT_USING_CPLUSPLUS is not set +# end of C/C++ and POSIX layer + +# +# Network +# +# CONFIG_RT_USING_SAL is not set +# CONFIG_RT_USING_NETDEV is not set +# CONFIG_RT_USING_LWIP is not set +# CONFIG_RT_USING_AT is not set +# end of Network + +# +# Memory protection +# +# CONFIG_RT_USING_MEM_PROTECTION is not set +# CONFIG_RT_USING_HW_STACK_GUARD is not set +# end of Memory protection + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_VAR_EXPORT is not set +# CONFIG_RT_USING_RESOURCE_ID is not set +# CONFIG_RT_USING_ADT is not set +# CONFIG_RT_USING_RT_LINK is not set +# end of Utilities + +# CONFIG_RT_USING_VBUS is not set + +# +# Using USB legacy version +# +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set +# end of Using USB legacy version + +# CONFIG_RT_USING_FDT is not set +# end of RT-Thread Components + +# +# RT-Thread Utestcases +# +# CONFIG_RT_USING_UTESTCASES is not set +# end of RT-Thread Utestcases + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_LORAWAN_DRIVER is not set +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_UMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_NANOPB is not set +# CONFIG_PKG_USING_WIFI_HOST_DRIVER is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set +# end of Marvell WiFi + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# end of Wiced WiFi + +# CONFIG_PKG_USING_RW007 is not set + +# +# CYW43012 WiFi +# +# CONFIG_PKG_USING_WLAN_CYW43012 is not set +# end of CYW43012 WiFi + +# +# BL808 WiFi +# +# CONFIG_PKG_USING_WLAN_BL808 is not set +# end of BL808 WiFi + +# +# CYW43439 WiFi +# +# CONFIG_PKG_USING_WLAN_CYW43439 is not set +# end of CYW43439 WiFi +# end of Wi-Fi + +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set +# CONFIG_PKG_USING_ZB_COORDINATOR is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_IOTSHARP_SDK is not set +# end of IoT Cloud + +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set +# CONFIG_PKG_USING_NMEALIB is not set +# CONFIG_PKG_USING_PDULIB is not set +# CONFIG_PKG_USING_BTSTACK is not set +# CONFIG_PKG_USING_BT_CYW43012 is not set +# CONFIG_PKG_USING_CYW43XX is not set +# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set +# CONFIG_PKG_USING_WAYZ_IOTKIT is not set +# CONFIG_PKG_USING_MAVLINK is not set +# CONFIG_PKG_USING_BSAL is not set +# CONFIG_PKG_USING_AGILE_MODBUS is not set +# CONFIG_PKG_USING_AGILE_FTP is not set +# CONFIG_PKG_USING_EMBEDDEDPROTO is not set +# CONFIG_PKG_USING_RT_LINK_HW is not set +# CONFIG_PKG_USING_RYANMQTT is not set +# CONFIG_PKG_USING_RYANW5500 is not set +# CONFIG_PKG_USING_LORA_PKT_FWD is not set +# CONFIG_PKG_USING_LORA_GW_DRIVER_LIB is not set +# CONFIG_PKG_USING_LORA_PKT_SNIFFER is not set +# CONFIG_PKG_USING_HM is not set +# CONFIG_PKG_USING_SMALL_MODBUS is not set +# CONFIG_PKG_USING_NET_SERVER is not set +# CONFIG_PKG_USING_ZFTP is not set +# CONFIG_PKG_USING_WOL is not set +# CONFIG_PKG_USING_ZEPHYR_POLLING is not set +# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set +# CONFIG_PKG_USING_LHC_MODBUS is not set +# CONFIG_PKG_USING_QMODBUS is not set +# end of IoT - internet of things + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_LIBSODIUM is not set +# CONFIG_PKG_USING_LIBHYDROGEN is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set +# CONFIG_PKG_USING_YD_CRYPTO is not set +# end of security packages + +# +# language packages +# + +# +# JSON: JavaScript Object Notation, a lightweight data-interchange format +# +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_RAPIDJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_AGILE_JSMN is not set +# CONFIG_PKG_USING_PARSON is not set +# end of JSON: JavaScript Object Notation, a lightweight data-interchange format + +# +# XML: Extensible Markup Language +# +# CONFIG_PKG_USING_SIMPLE_XML is not set +# CONFIG_PKG_USING_EZXML is not set +# end of XML: Extensible Markup Language + +# CONFIG_PKG_USING_LUATOS_SOC is not set +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set +# CONFIG_PKG_USING_PIKASCRIPT is not set +# CONFIG_PKG_USING_RTT_RUST is not set +# end of language packages + +# +# multimedia packages +# + +# +# LVGL: powerful and easy-to-use embedded GUI library +# +# CONFIG_PKG_USING_LVGL is not set +# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set +# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set +# end of LVGL: powerful and easy-to-use embedded GUI library + +# +# u8g2: a monochrome graphic library +# +# CONFIG_PKG_USING_U8G2_OFFICIAL is not set +# CONFIG_PKG_USING_U8G2 is not set +# end of u8g2: a monochrome graphic library + +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set +# CONFIG_PKG_USING_PDFGEN is not set +# CONFIG_PKG_USING_HELIX is not set +# CONFIG_PKG_USING_AZUREGUIX is not set +# CONFIG_PKG_USING_TOUCHGFX2RTT is not set +# CONFIG_PKG_USING_NUEMWIN is not set +# CONFIG_PKG_USING_MP3PLAYER is not set +# CONFIG_PKG_USING_TINYJPEG is not set +# CONFIG_PKG_USING_UGUI is not set +# CONFIG_PKG_USING_MCURSES is not set +# CONFIG_PKG_USING_TERMBOX is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_3GPP_AMRNB is not set +# end of multimedia packages + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_SEGGER_RTT is not set +# CONFIG_PKG_USING_RTT_AUTO_EXE_CMD is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_LOGMGR is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_MEMORYPERF is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_GPS_RMC is not set +# CONFIG_PKG_USING_URLENCODE is not set +# CONFIG_PKG_USING_UMCN is not set +# CONFIG_PKG_USING_LWRB2RTT is not set +# CONFIG_PKG_USING_CPU_USAGE is not set +# CONFIG_PKG_USING_GBK2UTF8 is not set +# CONFIG_PKG_USING_VCONSOLE is not set +# CONFIG_PKG_USING_KDB is not set +# CONFIG_PKG_USING_WAMR is not set +# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set +# CONFIG_PKG_USING_LWLOG is not set +# CONFIG_PKG_USING_ANV_TRACE is not set +# CONFIG_PKG_USING_ANV_MEMLEAK is not set +# CONFIG_PKG_USING_ANV_TESTSUIT is not set +# CONFIG_PKG_USING_ANV_BENCH is not set +# CONFIG_PKG_USING_DEVMEM is not set +# CONFIG_PKG_USING_REGEX is not set +# CONFIG_PKG_USING_MEM_SANDBOX is not set +# CONFIG_PKG_USING_SOLAR_TERMS is not set +# CONFIG_PKG_USING_GAN_ZHI is not set +# CONFIG_PKG_USING_FDT is not set +# CONFIG_PKG_USING_CBOX is not set +# CONFIG_PKG_USING_SNOWFLAKE is not set +# CONFIG_PKG_USING_HASH_MATCH is not set +# CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set +# CONFIG_PKG_USING_VOFA_PLUS is not set +# CONFIG_PKG_USING_RT_TRACE is not set +# CONFIG_PKG_USING_ZDEBUG is not set +# end of tools packages + +# +# system packages +# + +# +# enhanced kernel services +# +# CONFIG_PKG_USING_RT_MEMCPY_CM is not set +# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set +# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set +# end of enhanced kernel services + +# CONFIG_PKG_USING_AUNITY is not set + +# +# acceleration: Assembly language or algorithmic acceleration packages +# +# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set +# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set +# CONFIG_PKG_USING_QFPLIB_M3 is not set +# end of acceleration: Assembly language or algorithmic acceleration packages + +# +# CMSIS: ARM Cortex-M Microcontroller Software Interface Standard +# +# CONFIG_PKG_USING_CMSIS_5 is not set +# CONFIG_PKG_USING_CMSIS_CORE is not set +# CONFIG_PKG_USING_CMSIS_DSP is not set +# CONFIG_PKG_USING_CMSIS_NN is not set +# CONFIG_PKG_USING_CMSIS_RTOS1 is not set +# CONFIG_PKG_USING_CMSIS_RTOS2 is not set +# end of CMSIS: ARM Cortex-M Microcontroller Software Interface Standard + +# +# Micrium: Micrium software products porting for RT-Thread +# +# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set +# CONFIG_PKG_USING_UCOSII_WRAPPER is not set +# CONFIG_PKG_USING_UC_CRC is not set +# CONFIG_PKG_USING_UC_CLK is not set +# CONFIG_PKG_USING_UC_COMMON is not set +# CONFIG_PKG_USING_UC_MODBUS is not set +# end of Micrium: Micrium software products porting for RT-Thread + +# CONFIG_PKG_USING_FREERTOS_WRAPPER is not set +# CONFIG_PKG_USING_LITEOS_SDK is not set +# CONFIG_PKG_USING_TZ_DATABASE is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_PERF_COUNTER is not set +# CONFIG_PKG_USING_FILEX is not set +# CONFIG_PKG_USING_LEVELX is not set +# CONFIG_PKG_USING_FLASHDB is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_DFS_JFFS2 is not set +# CONFIG_PKG_USING_DFS_UFFS is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set +# CONFIG_PKG_USING_MININI is not set +# CONFIG_PKG_USING_QBOOT is not set +# CONFIG_PKG_USING_PPOOL is not set +# CONFIG_PKG_USING_OPENAMP is not set +# CONFIG_PKG_USING_RPMSG_LITE is not set +# CONFIG_PKG_USING_LPM is not set +# CONFIG_PKG_USING_TLSF is not set +# CONFIG_PKG_USING_EVENT_RECORDER is not set +# CONFIG_PKG_USING_ARM_2D is not set +# CONFIG_PKG_USING_MCUBOOT is not set +# CONFIG_PKG_USING_TINYUSB is not set +# CONFIG_PKG_USING_CHERRYUSB is not set +# CONFIG_PKG_USING_KMULTI_RTIMER is not set +# CONFIG_PKG_USING_TFDB is not set +# CONFIG_PKG_USING_QPC is not set +# CONFIG_PKG_USING_AGILE_UPGRADE is not set +# CONFIG_PKG_USING_FLASH_BLOB is not set +# CONFIG_PKG_USING_MLIBC is not set +# CONFIG_PKG_USING_TASK_MSG_BUS is not set +# CONFIG_PKG_USING_SFDB is not set +# CONFIG_PKG_USING_RTP is not set +# CONFIG_PKG_USING_REB is not set +# CONFIG_PKG_USING_R_RHEALSTONE is not set +# end of system packages + +# +# peripheral libraries and drivers +# + +# +# HAL & SDK Drivers +# + +# +# STM32 HAL & SDK Drivers +# +# CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set +# CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set +# CONFIG_PKG_USING_STM32WB55_SDK is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# end of STM32 HAL & SDK Drivers + +# +# Infineon HAL Packages +# +# CONFIG_PKG_USING_INFINEON_CAT1CM0P is not set +# CONFIG_PKG_USING_INFINEON_CMSIS is not set +# CONFIG_PKG_USING_INFINEON_CORE_LIB is not set +# CONFIG_PKG_USING_INFINEON_MTB_HAL_CAT1 is not set +# CONFIG_PKG_USING_INFINEON_MTB_PDL_CAT1 is not set +# CONFIG_PKG_USING_INFINEON_RETARGET_IO is not set +# CONFIG_PKG_USING_INFINEON_CAPSENSE is not set +# CONFIG_PKG_USING_INFINEON_CSDIDAC is not set +# CONFIG_PKG_USING_INFINEON_SERIAL_FLASH is not set +# CONFIG_PKG_USING_INFINEON_USBDEV is not set +# end of Infineon HAL Packages + +# CONFIG_PKG_USING_BLUETRUM_SDK is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_ESP_IDF is not set + +# +# Kendryte SDK +# +# CONFIG_PKG_USING_K210_SDK is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# end of Kendryte SDK + +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set +# end of HAL & SDK Drivers + +# +# sensors drivers +# +# CONFIG_PKG_USING_LSM6DSM is not set +# CONFIG_PKG_USING_LSM6DSL is not set +# CONFIG_PKG_USING_LPS22HB is not set +# CONFIG_PKG_USING_HTS221 is not set +# CONFIG_PKG_USING_LSM303AGR is not set +# CONFIG_PKG_USING_BME280 is not set +# CONFIG_PKG_USING_BME680 is not set +# CONFIG_PKG_USING_BMA400 is not set +# CONFIG_PKG_USING_BMI160_BMX160 is not set +# CONFIG_PKG_USING_SPL0601 is not set +# CONFIG_PKG_USING_MS5805 is not set +# CONFIG_PKG_USING_DA270 is not set +# CONFIG_PKG_USING_DF220 is not set +# CONFIG_PKG_USING_HSHCAL001 is not set +# CONFIG_PKG_USING_BH1750 is not set +# CONFIG_PKG_USING_MPU6XXX is not set +# CONFIG_PKG_USING_AHT10 is not set +# CONFIG_PKG_USING_AP3216C is not set +# CONFIG_PKG_USING_TSL4531 is not set +# CONFIG_PKG_USING_DS18B20 is not set +# CONFIG_PKG_USING_DHT11 is not set +# CONFIG_PKG_USING_DHTXX is not set +# CONFIG_PKG_USING_GY271 is not set +# CONFIG_PKG_USING_GP2Y10 is not set +# CONFIG_PKG_USING_SGP30 is not set +# CONFIG_PKG_USING_HDC1000 is not set +# CONFIG_PKG_USING_BMP180 is not set +# CONFIG_PKG_USING_BMP280 is not set +# CONFIG_PKG_USING_SHTC1 is not set +# CONFIG_PKG_USING_BMI088 is not set +# CONFIG_PKG_USING_HMC5883 is not set +# CONFIG_PKG_USING_MAX6675 is not set +# CONFIG_PKG_USING_TMP1075 is not set +# CONFIG_PKG_USING_SR04 is not set +# CONFIG_PKG_USING_CCS811 is not set +# CONFIG_PKG_USING_PMSXX is not set +# CONFIG_PKG_USING_RT3020 is not set +# CONFIG_PKG_USING_MLX90632 is not set +# CONFIG_PKG_USING_MLX90393 is not set +# CONFIG_PKG_USING_MLX90392 is not set +# CONFIG_PKG_USING_MLX90397 is not set +# CONFIG_PKG_USING_MS5611 is not set +# CONFIG_PKG_USING_MAX31865 is not set +# CONFIG_PKG_USING_VL53L0X is not set +# CONFIG_PKG_USING_INA260 is not set +# CONFIG_PKG_USING_MAX30102 is not set +# CONFIG_PKG_USING_INA226 is not set +# CONFIG_PKG_USING_LIS2DH12 is not set +# CONFIG_PKG_USING_HS300X is not set +# CONFIG_PKG_USING_ZMOD4410 is not set +# CONFIG_PKG_USING_ISL29035 is not set +# CONFIG_PKG_USING_MMC3680KJ is not set +# CONFIG_PKG_USING_QMP6989 is not set +# CONFIG_PKG_USING_BALANCE is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_SHT4X is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_ADT74XX is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_AS7341 is not set +# CONFIG_PKG_USING_CW2015 is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_PAJ7620 is not set +# CONFIG_PKG_USING_STHS34PF80 is not set +# end of sensors drivers + +# +# touch drivers +# +# CONFIG_PKG_USING_GT9147 is not set +# CONFIG_PKG_USING_GT1151 is not set +# CONFIG_PKG_USING_GT917S is not set +# CONFIG_PKG_USING_GT911 is not set +# CONFIG_PKG_USING_FT6206 is not set +# CONFIG_PKG_USING_FT5426 is not set +# CONFIG_PKG_USING_FT6236 is not set +# CONFIG_PKG_USING_XPT2046_TOUCH is not set +# CONFIG_PKG_USING_CST816X is not set +# CONFIG_PKG_USING_CST812T is not set +# end of touch drivers + +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_MULTI_INFRARED is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_ILI9341 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_WS2812B is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set +# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set +# CONFIG_PKG_USING_QLED is not set +# CONFIG_PKG_USING_AGILE_CONSOLE is not set +# CONFIG_PKG_USING_LD3320 is not set +# CONFIG_PKG_USING_WK2124 is not set +# CONFIG_PKG_USING_LY68L6400 is not set +# CONFIG_PKG_USING_DM9051 is not set +# CONFIG_PKG_USING_SSD1306 is not set +# CONFIG_PKG_USING_GC9A01 is not set +# CONFIG_PKG_USING_QKEY is not set +# CONFIG_PKG_USING_RS485 is not set +# CONFIG_PKG_USING_RS232 is not set +# CONFIG_PKG_USING_NES is not set +# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set +# CONFIG_PKG_USING_VDEVICE is not set +# CONFIG_PKG_USING_SGM706 is not set +# CONFIG_PKG_USING_RDA58XX is not set +# CONFIG_PKG_USING_LIBNFC is not set +# CONFIG_PKG_USING_MFOC is not set +# CONFIG_PKG_USING_TMC51XX is not set +# CONFIG_PKG_USING_TCA9534 is not set +# CONFIG_PKG_USING_KOBUKI is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_MICRO_ROS is not set +# CONFIG_PKG_USING_MCP23008 is not set +# CONFIG_PKG_USING_MISAKA_AT24CXX is not set +# CONFIG_PKG_USING_MISAKA_RGB_BLING is not set +# CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set +# CONFIG_PKG_USING_SOFT_SERIAL is not set +# CONFIG_PKG_USING_MB85RS16 is not set +# CONFIG_PKG_USING_RFM300 is not set +# CONFIG_PKG_USING_IO_INPUT_FILTER is not set +# CONFIG_PKG_USING_LRF_NV7LIDAR is not set +# CONFIG_PKG_USING_AIP650 is not set +# CONFIG_PKG_USING_FINGERPRINT is not set +# CONFIG_PKG_USING_BT_ECB02C is not set +# CONFIG_PKG_USING_UAT is not set +# CONFIG_PKG_USING_ST7789 is not set +# CONFIG_PKG_USING_VS1003 is not set +# CONFIG_PKG_USING_X9555 is not set +# CONFIG_PKG_USING_SYSTEM_RUN_LED is not set +# CONFIG_PKG_USING_BT_MX01 is not set +# CONFIG_PKG_USING_RGPOWER is not set +# CONFIG_PKG_USING_SPI_TOOLS is not set +# end of peripheral libraries and drivers + +# +# AI packages +# +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_QUEST is not set +# CONFIG_PKG_USING_NAXOS is not set +# CONFIG_PKG_USING_R_TINYMAIX is not set +# end of AI packages + +# +# Signal Processing and Control Algorithm Packages +# +# CONFIG_PKG_USING_APID is not set +# CONFIG_PKG_USING_FIRE_PID_CURVE is not set +# CONFIG_PKG_USING_QPID is not set +# CONFIG_PKG_USING_UKAL is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_KISSFFT is not set +# end of Signal Processing and Control Algorithm Packages + +# +# miscellaneous packages +# + +# +# project laboratory +# +# end of project laboratory + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set +# end of samples: kernel and components samples + +# +# entertainment: terminal games and other interesting software packages +# +# CONFIG_PKG_USING_CMATRIX is not set +# CONFIG_PKG_USING_SL is not set +# CONFIG_PKG_USING_CAL is not set +# CONFIG_PKG_USING_ACLOCK is not set +# CONFIG_PKG_USING_THREES is not set +# CONFIG_PKG_USING_2048 is not set +# CONFIG_PKG_USING_SNAKE is not set +# CONFIG_PKG_USING_TETRIS is not set +# CONFIG_PKG_USING_DONUT is not set +# CONFIG_PKG_USING_COWSAY is not set +# CONFIG_PKG_USING_MORSE is not set +# CONFIG_PKG_USING_TINYSQUARE is not set +# end of entertainment: terminal games and other interesting software packages + +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_LZMA is not set +# CONFIG_PKG_USING_RALARAM is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_MINIZIP is not set +# CONFIG_PKG_USING_HEATSHRINK is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_KI is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_CRCLIB is not set +# CONFIG_PKG_USING_LWGPS is not set +# CONFIG_PKG_USING_STATE_MACHINE is not set +# CONFIG_PKG_USING_DESIGN_PATTERN is not set +# CONFIG_PKG_USING_CONTROLLER is not set +# CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set +# CONFIG_PKG_USING_MFBD is not set +# CONFIG_PKG_USING_SLCAN2RTT is not set +# CONFIG_PKG_USING_SOEM is not set +# CONFIG_PKG_USING_QPARAM is not set +# CONFIG_PKG_USING_CorevMCU_CLI is not set +# CONFIG_PKG_USING_GET_IRQ_PRIORITY is not set +# end of miscellaneous packages + +# +# Arduino libraries +# +# CONFIG_PKG_USING_RTDUINO is not set + +# +# Projects and Demos +# +# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set +# CONFIG_PKG_USING_ARDUINO_SKETCH_LOADER_DEMO is not set +# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set +# CONFIG_PKG_USING_ARDUINO_NINEINONE_SENSOR_SHIELD is not set +# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set +# CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set +# end of Projects and Demos + +# +# Sensors +# +# CONFIG_PKG_USING_ARDUINO_SENSOR_DEVICE_DRIVERS is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSORLAB is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL375 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L0X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L1X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL6180X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31855 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31865 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31856 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX6675 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90614 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS1 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AHTX0 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS0 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP280 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADT7410 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME680 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9808 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4728 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA219 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR390 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL345 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DHT is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9600 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM6DS is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO055 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX1704X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMC56X3 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90393 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90395 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ICM20X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DPS310 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTS221 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT4X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT31 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL343 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME280 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS726X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AMG88XX is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2320 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2315 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR329_LTR303 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP3XX is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MS8607 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3MDL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90640 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMA8451 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MSA301 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL115A2 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X_RVC is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS2MDL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303DLH_MAG is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LC709203F is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CAP1188 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CCS811 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_NAU7802 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS331 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS2X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS35HW is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303_ACCEL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3DH is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8591 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL3115A2 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPR121 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPRLS is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPU6050 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCT2075 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PM25AQI is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_EMC2101 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXAS21002C is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SCD30 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXOS8700 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HMC5883_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP30 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP006 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TLA202X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCS34725 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI7021 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI1145 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP40 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHTC3 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HDC1000 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU21DF is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS7341 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU31D is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA260 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP007_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_L3GD20 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP117 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSC2007 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2561 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2591_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VCNL4040 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6070 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6075 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML7700 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LIS3DHTR is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_DHT is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL335 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL345 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BME280 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BMP280 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_H3LIS331DL is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_MMA7660 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_TSL2561 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_PAJ7620 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_VL53L0X is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_ITG3200 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SHT31 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HP20X is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_DRV2605L is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BBM150 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HMC5883L is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LSM303DLH is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_TCS3414CS is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_MP503 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BMP085 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HIGHTEMP is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_VEML6070 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SI1145 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SHT35 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_AT42QT1070 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LSM6DS3 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HDC1000 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HM3301 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_MCP9600 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LTC2941 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LDC1612 is not set +# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set +# CONFIG_PKG_USING_ARDUINO_JARZEBSKI_MPU6050 is not set +# end of Sensors + +# +# Display +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_U8G2 is not set +# CONFIG_PKG_USING_ARDUINO_TFT_ESPI is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set +# CONFIG_PKG_USING_SEEED_TM1637 is not set +# end of Display + +# +# Timing +# +# CONFIG_PKG_USING_ARDUINO_RTCLIB is not set +# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set +# CONFIG_PKG_USING_ARDUINO_TICKER is not set +# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set +# end of Timing + +# +# Data Processing +# +# CONFIG_PKG_USING_ARDUINO_KALMANFILTER is not set +# CONFIG_PKG_USING_ARDUINO_ARDUINOJSON is not set +# CONFIG_PKG_USING_ARDUINO_TENSORFLOW_LITE_MICRO is not set +# CONFIG_PKG_USING_ARDUINO_RUNNINGMEDIAN is not set +# end of Data Processing + +# +# Data Storage +# + +# +# Communication +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PN532 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI4713 is not set +# end of Communication + +# +# Device Control +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8574 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCA9685 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TPA2016 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DRV2605 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS1841 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS3502 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_PCF85063TP is not set +# end of Device Control + +# +# Other +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MFRC630 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI5351 is not set +# end of Other + +# +# Signal IO +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BUSIO is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCA8418 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP23017 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADS1X15 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AW9523 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP3008 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4725 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BD3491FS is not set +# end of Signal IO + +# +# Uncategorized +# +# end of Arduino libraries +# end of RT-Thread online packages + +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32G0=y +CONFIG_BOARD_SERIES_STM32_NUCLEO_64=y + +# +# Hardware Drivers Config +# + +# +# Onboard Peripheral Drivers +# + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y +CONFIG_BSP_STM32_UART_V1_TX_TIMEOUT=2000 +CONFIG_BSP_USING_UART1=y +# CONFIG_BSP_USING_UDID is not set +# end of On-chip Peripheral Drivers + +# +# Board extended module Drivers +# +# end of Hardware Drivers Config diff --git a/bsp/stm32/stm32g030-tiny-board/.gitignore b/bsp/stm32/stm32g030-tiny-board/.gitignore new file mode 100644 index 00000000000..7221bde019d --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/.gitignore @@ -0,0 +1,42 @@ +*.pyc +*.map +*.dblite +*.elf +*.bin +*.hex +*.axf +*.exe +*.pdb +*.idb +*.ilk +*.old +build +Debug +documentation/html +packages/ +*~ +*.o +*.obj +*.out +*.bak +*.dep +*.lib +*.i +*.d +.DS_Stor* +.config 3 +.config 4 +.config 5 +Midea-X1 +*.uimg +GPATH +GRTAGS +GTAGS +.vscode +JLinkLog.txt +JLinkSettings.ini +DebugConfig/ +RTE/ +settings/ +*.uvguix* +cconfig.h diff --git a/bsp/stm32/stm32g030-tiny-board/Kconfig b/bsp/stm32/stm32g030-tiny-board/Kconfig new file mode 100644 index 00000000000..dd247b55bad --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/Kconfig @@ -0,0 +1,27 @@ +mainmenu "RT-Thread Configuration" + +BSP_DIR := . + +RTT_DIR := ../../.. + +PKGS_DIR := packages + +config SOC_STM32G030RB + bool + select SOC_SERIES_STM32G0 + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + +config BOARD_STM32G030_TINY_BOARD + bool + select BOARD_SERIES_STM32_NUCLEO_64 + default y + +source "$(RTT_DIR)/Kconfig" +osource "$PKGS_DIR/Kconfig" +rsource "../libraries/Kconfig" + +if !RT_USING_NANO +rsource "board/Kconfig" +endif diff --git a/bsp/stm32/stm32g030-tiny-board/README.md b/bsp/stm32/stm32g030-tiny-board/README.md new file mode 100644 index 00000000000..a97281811ac --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/README.md @@ -0,0 +1,61 @@ +# STM32g030-tiny-board BSP Introduction + +[中文](README_zh.md) + +### Description + +The STM32G030x6/x8 mainstream microcontrollers are based on high-performance Arm® Cortex®-M0+ 32-bit RISC core operating at up to 64 MHz frequency. Offering a high level of integration, they are suitable for a wide range of applications in consumer, industrial and appliance domains and ready for the Internet of Things (IoT) solutions. + +The devices incorporate a memory protection unit (MPU), high-speed embedded memories (8 Kbytes of SRAM and up to 64 Kbytes of Flash program memory with read protection, write protection), DMA, an extensive range of system functions, enhanced I/Os, and peripherals. The devices offer standard communication interfaces (two I2Cs, two SPIs / one I2S, and two USARTs), one 12-bit ADC (2.5 MSps) with up to 19 channels, a low-power RTC, an advanced control PWM timer, four general-purpose 16-bit timers, two watchdog timers, and a SysTick timer. + +The devices operate within ambient temperatures from -40 to 85°C and with supply voltages from 2.0 V to 3.6 V. Optimized dynamic consumption combined with a comprehensive set of power-saving modes allows the design of low-power applications. + +VBAT direct battery input allows keeping RTC and backup registers powered. + +The devices come in packages with 8 to 48 pins. + +### All features + +- Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz +- -40°C to 85°C operating temperature +- Memories + - Up to 64 Kbytes of Flash memory with protection + - 8 Kbytes of SRAM with HW parity check +- CRC calculation unit +- Reset and power management + - Voltage range: 2.0 V to 3.6 V + - Power-on/Power-down reset (POR/PDR) + - Low-power modes:Sleep, Stop, Standby + - VBAT supply for RTC and backup registers +- Clock management + - 4 to 48 MHz crystal oscillator + - 32 kHz crystal oscillator with calibration + - Internal 16 MHz RC with PLL option + - Internal 32 kHz RC oscillator (±5 %) +- Up to 44 fast I/Os + - All mappable on external interrupt vectors + - Multiple 5 V-tolerant I/Os + +- 5-channel DMA controller with flexible mapping +- 12-bit, 0.4 µs ADC (up to 16 ext. channels) + - Up to 16-bit with hardware oversampling + - Conversion range: 0 to 3.6V +- 8 timers: 16-bit for advanced motor control, four 16-bit general-purpose, two watchdogs, SysTick timer +- Calendar RTC with alarm and periodic wakeup from Stop/Standby +- Communication interfaces + - Two I2C-bus interfaces supporting Fast-mode Plus (1 Mbit/s) with extra current sink, one supporting SMBus/PMBus and wakeup from Stop mode + - Two USARTs with master/slave synchronous SPI; one supporting ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature + - Two SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, one multiplexed with I2S interface +- Development support: serial wire debug (SWD) +- All packages ECOPACK 2 compliant + +## Read more + +| Documents | Description | +| :----------------------------------------------------------: | :----------------------------------------------------------: | +| [STM32_Nucleo-144_BSP_Introduction](../docs/STM32_Nucleo-144_BSP_Introduction.md) | How to run RT-Thread on STM32 Nucleo-144 boards (**Must-Read**) | +| [STM32G030C8 ST Official Website](https://www.st.com/en/microcontrollers-microprocessors/stm32g030c8.html) | STM32G030C8 datasheet and other resources | + +## Maintained By + +[hywing](https://github.com/hywing) \ No newline at end of file diff --git a/bsp/stm32/stm32g030-tiny-board/README_zh.md b/bsp/stm32/stm32g030-tiny-board/README_zh.md new file mode 100644 index 00000000000..c80728bad25 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/README_zh.md @@ -0,0 +1,108 @@ +# STM32g030-tiny-board 开发板 BSP 说明 + +## 简介 + +本文档为 hywing为 STM32g030-tiny-board 开发板提供的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +STM32g030-tiny-board 是一款基于 ARM Cortex-M0 内核的开发板，最高主频为 64Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32G030C8T6 的芯片性能。 + +开发板外观如下图所示： + +![board](figures/board.jpg) + +该开发板常用 **板载资源** 如下： + +- MCU：STM32G030C8T6，主频64MHz，64KB FLASH ，8K RAM +- 调试接口，标准 JTAG/SWD + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **板载外设** | **支持情况** | **备注** | +| :----------------- | :----------: | :------------------------------------- | +| USB 转串口 | 支持 || +| **片上外设** | **支持情况** | **备注** | +| GPIO | 支持 | | +| UART | 支持 | UART1 | + + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + + +### 快速上手 + +本 BSP 为开发者提供 MDK5工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用数据线连接开发板到 PC，打开电源开关。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 工程默认配置使用 ST_LINK 仿真器下载程序，在通过 ST_LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板 + +#### 运行结果 + +下载程序成功之后，系统会自动运行，LED循环点亮。 + +连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + + \ | / +- RT - Thread Operating System + / | \ 5.2.0 build Dec 2 2024 11:35:30 + 2006 - 2024 Copyright by RT-Thread team + +msh > +``` +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 串口1的功能，如果需使用更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下： + +1. 在 bsp 下打开 env 工具。 + +2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 + +3. 输入`pkgs --update`命令更新软件包。 + +4. 输入`scons --target=mdk5` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 + +## 注意事项 + +- 调试串口为串口1 映射说明 + + PB6 ------> USART1_TX + + PB7 ------> USART1_RX + +## 联系人信息 + +维护人: + +- [hywing](https://github.com/hywing) \ No newline at end of file diff --git a/bsp/stm32/stm32g030-tiny-board/SConscript b/bsp/stm32/stm32g030-tiny-board/SConscript new file mode 100644 index 00000000000..c7ef7659ece --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/SConscript @@ -0,0 +1,14 @@ +# for module compiling +import os +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32g030-tiny-board/SConstruct b/bsp/stm32/stm32g030-tiny-board/SConstruct new file mode 100644 index 00000000000..eab92b6e1c6 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/SConstruct @@ -0,0 +1,59 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM in ['iccarm']: + env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32G0xx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'), variant_dir='build/libraries/'+stm32_library, duplicate=0)) +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'),variant_dir='build/libraries/'+'HAL_Drivers', duplicate=0)) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32g030-tiny-board/applications/SConscript b/bsp/stm32/stm32g030-tiny-board/applications/SConscript new file mode 100644 index 00000000000..9bb9abae897 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/applications/SConscript @@ -0,0 +1,15 @@ +from building import * +import os + +cwd = GetCurrentDir() +src = Glob('*.c') +CPPPATH = [cwd] + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +list = os.listdir(cwd) +for item in list: + if os.path.isfile(os.path.join(cwd, item, 'SConscript')): + group = group + SConscript(os.path.join(item, 'SConscript')) + +Return('group') diff --git a/bsp/stm32/stm32g030-tiny-board/applications/main.c b/bsp/stm32/stm32g030-tiny-board/applications/main.c new file mode 100644 index 00000000000..8350a9fd0ce --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/applications/main.c @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2006-2025 RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2025-3-17 hywing first version + */ + +#include +#include +#ifndef RT_USING_NANO +#include +#endif /* RT_USING_NANO */ + + +/* defined the LED0 pin: PB4 */ +#define LED0_PIN GET_PIN(B, 4) + +int main(void) +{ + /* set LED0 pin mode to output */ + rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); + + + rt_kprintf("Welcome to the world of IoT Stuff!\r\n"); + + while (1) + { + rt_pin_write(LED0_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_thread_mdelay(500); + } + + return RT_EOK; +} diff --git a/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/.mxproject new file mode 100644 index 00000000000..98015ced6bc --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/.mxproject @@ -0,0 +1,14 @@ +[PreviousLibFiles] +LibFiles=Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_lpuart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_bus.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_system.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_utils.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ramfunc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_def.h;Drivers\STM32G0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_exti.h;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_dma.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_dmamux.h;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_lpuart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_bus.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_system.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_utils.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ramfunc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_def.h;Drivers\STM32G0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_exti.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g030xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\system_stm32g0xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\system_stm32g0xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[PreviousUsedKeilFiles] +SourceFiles=..\Src\main.c;..\Src\stm32g0xx_it.c;..\Src\stm32g0xx_hal_msp.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;..\Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;..\\Src\system_stm32g0xx.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;..\Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;..\Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;..\\Src\system_stm32g0xx.c;;; +HeaderPath=..\Drivers\STM32G0xx_HAL_Driver\Inc;..\Drivers\STM32G0xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32G0xx\Include;..\Drivers\CMSIS\Include;..\Inc; +CDefines=USE_HAL_DRIVER;STM32G030xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +HeaderPath=..\Inc +HeaderFiles=stm32g0xx_it.h;stm32g0xx_hal_conf.h;main.h; +SourcePath=..\Src +SourceFiles=stm32g0xx_it.c;stm32g0xx_hal_msp.c;main.c; + diff --git a/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/CubeMX_Config.ioc new file mode 100644 index 00000000000..633e42f8ac7 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/CubeMX_Config.ioc @@ -0,0 +1,103 @@ +#MicroXplorer Configuration settings - do not modify +CAD.formats= +CAD.pinconfig= +CAD.provider= +File.Version=6 +GPIO.groupedBy= +KeepUserPlacement=false +Mcu.CPN=STM32G030C8T6 +Mcu.Family=STM32G0 +Mcu.IP0=NVIC +Mcu.IP1=RCC +Mcu.IP2=SYS +Mcu.IP3=USART1 +Mcu.IPNb=4 +Mcu.Name=STM32G030C(6-8)Tx +Mcu.Package=LQFP48 +Mcu.Pin0=PA13 +Mcu.Pin1=PA14-BOOT0 +Mcu.Pin2=PB6 +Mcu.Pin3=PB7 +Mcu.Pin4=VP_SYS_VS_Systick +Mcu.PinsNb=5 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32G030C8Tx +MxCube.Version=6.12.1 +MxDb.Version=DB.6.0.121 +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true +NVIC.SysTick_IRQn=true\:3\:0\:false\:false\:true\:false\:true\:false +PA13.Mode=Serial_Wire +PA13.Signal=SYS_SWDIO +PA14-BOOT0.Mode=Serial_Wire +PA14-BOOT0.Signal=SYS_SWCLK +PB6.Locked=true +PB6.Mode=Asynchronous +PB6.Signal=USART1_TX +PB7.Locked=true +PB7.Mode=Asynchronous +PB7.Signal=USART1_RX +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32G030C8Tx +ProjectManager.FirmwarePackage=STM32Cube FW_G0 V1.6.2 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CubeMX_Config.ioc +ProjectManager.ProjectName=CubeMX_Config +ProjectManager.ProjectStructure= +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5 +ProjectManager.ToolChainLocation= +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_I2C2_Init-I2C2-false-HAL-true +RCC.AHBFreq_Value=16000000 +RCC.APBFreq_Value=16000000 +RCC.APBTimFreq_Value=16000000 +RCC.CortexFreq_Value=16000000 +RCC.EXTERNAL_CLOCK_VALUE=12288000 +RCC.FCLKCortexFreq_Value=16000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=16000000 +RCC.HSE_VALUE=8000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=16000000 +RCC.I2S1Freq_Value=16000000 +RCC.IPParameters=AHBFreq_Value,APBFreq_Value,APBTimFreq_Value,CortexFreq_Value,EXTERNAL_CLOCK_VALUE,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2S1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,PLLPoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,SYSCLKFreq_VALUE,USART1Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value +RCC.LSCOPinFreq_Value=32000 +RCC.LSI_VALUE=32000 +RCC.MCO1PinFreq_Value=16000000 +RCC.PLLPoutputFreq_Value=64000000 +RCC.PLLRCLKFreq_Value=64000000 +RCC.PWRFreq_Value=16000000 +RCC.SYSCLKFreq_VALUE=16000000 +RCC.USART1Freq_Value=16000000 +RCC.VCOInputFreq_Value=16000000 +RCC.VCOOutputFreq_Value=128000000 +USART1.IPParameters=VirtualMode-Asynchronous +USART1.VirtualMode-Asynchronous=VM_ASYNC +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom diff --git a/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Inc/main.h new file mode 100644 index 00000000000..31b3b046ba1 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Inc/main.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ diff --git a/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Inc/stm32g0xx_hal_conf.h b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Inc/stm32g0xx_hal_conf.h new file mode 100644 index 00000000000..d7e7d7cd986 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Inc/stm32g0xx_hal_conf.h @@ -0,0 +1,351 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CONF_H +#define STM32G0xx_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief This is the list of modules where register callback can be used + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_CEC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u +#define USE_HAL_HCD_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_I2S_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_PCD_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ +#endif + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S1 peripheral + * This value is used by the RCC HAL module to compute the I2S1 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S1_CLOCK_VALUE) +#define EXTERNAL_I2S1_CLOCK_VALUE (12288000UL) /*!< Value of the I2S1 External clock source in Hz*/ +#endif /* EXTERNAL_I2S1_CLOCK_VALUE */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief External clock source for I2S2 peripheral + * This value is used by the RCC HAL module to compute the I2S2 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S2_CLOCK_VALUE) + #define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/ +#endif /* EXTERNAL_I2S2_CLOCK_VALUE */ +#endif + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 3U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* ################## CRYP peripheral configuration ########################## */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include modules header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32g0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32g0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32g0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32g0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32g0xx_hal_adc.h" +#include "stm32g0xx_hal_adc_ex.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32g0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED +#include "stm32g0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32g0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32g0xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32g0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32g0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32g0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED +#include "stm32g0xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32g0xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32g0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32g0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32g0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32g0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32g0xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32g0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32g0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32g0xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32g0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32g0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32g0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32g0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32g0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32g0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32g0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32g0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CONF_H */ diff --git a/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c new file mode 100644 index 00000000000..6e24361d052 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c @@ -0,0 +1,160 @@ + +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + + /** Initializes the peripherals clocks + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1; + PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + /*Error_Handler();*/ + } + + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**USART1 GPIO Configuration + PB6 ------> USART1_TX + PB7 ------> USART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF0_USART1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PB6 ------> USART1_TX + PB7 ------> USART1_RX + */ + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7); + + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/bsp/stm32/stm32g030-tiny-board/board/Kconfig b/bsp/stm32/stm32g030-tiny-board/board/Kconfig new file mode 100644 index 00000000000..46b6bab5b07 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/Kconfig @@ -0,0 +1,38 @@ +menu "Hardware Drivers Config" + +menu "Onboard Peripheral Drivers" + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + menuconfig BSP_USING_UART + bool "Enable UART1" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_STM32_UART_V1_TX_TIMEOUT + int "UART TX timeout" + default 2000 + depends on RT_USING_SERIAL_V1 + + config BSP_USING_UART1 + bool "Enable UART1" + default y + + endif + + source "$(BSP_DIR)/../libraries/HAL_Drivers/drivers/Kconfig" + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32g030-tiny-board/board/SConscript b/bsp/stm32/stm32g030-tiny-board/board/SConscript new file mode 100644 index 00000000000..1732158f094 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/SConscript @@ -0,0 +1,29 @@ +import os +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add general drivers +src = Split(''' +board.c +CubeMX_Config/Src/stm32g0xx_hal_msp.c +''') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Inc'] + +startup_path_prefix = SDK_LIB + +if rtconfig.PLATFORM in ['gcc']: + src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/Device/ST/STM32G0xx/Source/Templates/gcc/startup_stm32g030xx.s'] +elif rtconfig.PLATFORM in ['armcc', 'armclang']: + src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/Device/ST/STM32G0xx/Source/Templates/arm/startup_stm32g030xx.s'] +elif rtconfig.PLATFORM in ['iccarm']: + src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/Device/ST/STM32G0xx/Source/Templates/iar/startup_stm32g030xx.s'] + +CPPDEFINES = ['STM32G030xx'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) +Return('group') diff --git a/bsp/stm32/stm32g030-tiny-board/board/board.c b/bsp/stm32/stm32g030-tiny-board/board/board.c new file mode 100644 index 00000000000..6ee637cbda4 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/board.c @@ -0,0 +1,47 @@ +/* + * Copyright (c) 2006-2025 RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-12-21 zylx first version + */ + +#include "board.h" + +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) + { + Error_Handler(); + } +} diff --git a/bsp/stm32/stm32g030-tiny-board/board/board.h b/bsp/stm32/stm32g030-tiny-board/board/board.h new file mode 100644 index 00000000000..b9adb69f929 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/board.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2006-2025 RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-5 SummerGift first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include +#include "drv_common.h" +#include "drv_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (64 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +/* Internal SRAM memory size[Kbytes] <8-64>, Default: 64*/ +#define STM32_SRAM_SIZE 8 +#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024) + +#if defined(__ARMCC_VERSION) +extern int Image$$RW_IRAM1$$ZI$$Limit; +#define HEAP_BEGIN ((void *)&Image$$RW_IRAM1$$ZI$$Limit) +#elif __ICCARM__ +#pragma section="CSTACK" +#define HEAP_BEGIN (__segment_end("CSTACK")) +#else +extern int __bss_end; +#define HEAP_BEGIN ((void *)&__bss_end) +#endif + +#define HEAP_END STM32_SRAM_END + +void SystemClock_Config(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __BOARD_H__ */ diff --git a/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.icf b/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.icf new file mode 100644 index 00000000000..e897e945c10 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.icf @@ -0,0 +1,28 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x08040000; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20008000; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x0400; +define symbol __ICFEDIT_size_heap__ = 0x000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, last block CSTACK}; diff --git a/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.lds b/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.lds new file mode 100644 index 00000000000..e2394dc95e1 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.lds @@ -0,0 +1,157 @@ +/* + * linker script for STM32F10x with GNU ld + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 128k /* 128KB flash */ + RAM (rw) : ORIGIN = 0x20000000, LENGTH = 8k /* 8K sram */ +} +ENTRY(Reset_Handler) +_system_stack_size = 0x400; + +SECTIONS +{ + .text : + { + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + + . = ALIGN(4); + + PROVIDE(__ctors_start__ = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE(__ctors_end__ = .); + + . = ALIGN(4); + + _etext = .; + } > ROM = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > ROM + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + + PROVIDE(__dtors_start__ = .); + KEEP(*(SORT(.dtors.*))) + KEEP(*(.dtors)) + PROVIDE(__dtors_end__ = .); + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >RAM + + .stack : + { + . = ALIGN(4); + _sstack = .; + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >RAM + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(.bss.*) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > RAM + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.sct b/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.sct new file mode 100644 index 00000000000..ba1878dfbea --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/board/linker_scripts/link.sct @@ -0,0 +1,15 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00010000 { ; load region size_region + ER_IROM1 0x08000000 0x00010000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x20000000 0x00002000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/stm32/stm32g030-tiny-board/figures/board.jpg b/bsp/stm32/stm32g030-tiny-board/figures/board.jpg new file mode 100644 index 00000000000..5cb669a8229 Binary files /dev/null and b/bsp/stm32/stm32g030-tiny-board/figures/board.jpg differ diff --git a/bsp/stm32/stm32g030-tiny-board/project.uvoptx b/bsp/stm32/stm32g030-tiny-board/project.uvoptx new file mode 100644 index 00000000000..3320299dfdb --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/project.uvoptx @@ -0,0 +1,192 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 8000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32G0xx_64 -FS08000000 -FL010000 -FP0($$Device:STM32G030C8Tx$CMSIS\Flash\STM32G0xx_64.FLM)) + + + 0 + ST-LINKIII-KEIL_SWO + -UG -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("") -D00(00000000) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32G0xx_64.FLM -FS08000000 -FL010000 -FP0($$Device:STM32G030C8Tx$CMSIS\Flash\STM32G0xx_64.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32g030-tiny-board/project.uvprojx b/bsp/stm32/stm32g030-tiny-board/project.uvprojx new file mode 100644 index 00000000000..7397de3327d --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/project.uvprojx @@ -0,0 +1,1243 @@ + + + 2.1 +
### uVision Project, (C) Keil Software
+ + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32G030C8Tx + STMicroelectronics + Keil.STM32G0xx_DFP.1.2.0 + https://www.keil.com/pack/ + IRAM(0x20000000,0x00002000) IROM(0x08000000,0x00010000) CPUTYPE("Cortex-M0+") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32G0xx_64 -FS08000000 -FL010000 -FP0($$Device:STM32G030C8Tx$CMSIS\Flash\STM32G0xx_64.FLM)) + 0 + $$Device:STM32G030C8Tx$Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0xx.h + + + + + + + + + + $$Device:STM32G030C8Tx$CMSIS\SVD\STM32G030.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 0 + 0 + 0 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP-MPU + DARMCM1.DLL + -pCM0+ + SARMCM3.DLL + -MPU + TARMCM1.DLL + -pCM0+ + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M0+" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x2000 + + + 1 + 0x8000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x10000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x2000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + STM32G030xx, RT_USING_LIBC, __STDC_LIMIT_MACROS, __RTTHREAD__, __CLK_TCK=RT_TICK_PER_SECOND, RT_USING_ARMLIBC, USE_HAL_DRIVER + + ..\libraries\HAL_Drivers\CMSIS\Include;..\..\..\components\libc\compilers\common\include;applications;board;..\..\..\components\libc\posix\ipc;.;..\..\..\components\libc\posix\io\epoll;..\..\..\components\libc\compilers\common\extension;board\CubeMX_Config\Inc;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\libraries\HAL_Drivers\drivers\config;..\libraries\HAL_Drivers;..\..\..\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\smp_call;..\..\..\components\drivers\phy;..\..\..\components\drivers\include;..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Inc;..\..\..\components\libc\posix\io\poll;..\libraries\HAL_Drivers\drivers;..\..\..\components\drivers\include;..\libraries\STM32G0xx_HAL\CMSIS\Device\ST\STM32G0xx\Include;..\..\..\components\finsh;..\..\..\components\libc\posix\io\eventfd;..\..\..\libcpu\arm\cortex-m0;..\..\..\components\drivers\include;..\..\..\libcpu\arm\common + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 4 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + Compiler + + + syscall_mem.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + + + + + syscalls.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscalls.c + + + + + cctype.c + 1 + ..\..\..\components\libc\compilers\common\cctype.c + + + + + cstdlib.c + 1 + ..\..\..\components\libc\compilers\common\cstdlib.c + + + + + cstring.c + 1 + ..\..\..\components\libc\compilers\common\cstring.c + + + + + ctime.c + 1 + ..\..\..\components\libc\compilers\common\ctime.c + + + + + cunistd.c + 1 + ..\..\..\components\libc\compilers\common\cunistd.c + + + + + cwchar.c + 1 + ..\..\..\components\libc\compilers\common\cwchar.c + + + + + DeviceDrivers + + + device.c + 1 + ..\..\..\components\drivers\core\device.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + completion_comm.c + 1 + ..\..\..\components\drivers\ipc\completion_comm.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + completion_up.c + 1 + ..\..\..\components\drivers\ipc\completion_up.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + condvar.c + 1 + ..\..\..\components\drivers\ipc\condvar.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + dataqueue.c + 1 + ..\..\..\components\drivers\ipc\dataqueue.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + pipe.c + 1 + ..\..\..\components\drivers\ipc\pipe.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + ringblk_buf.c + 1 + ..\..\..\components\drivers\ipc\ringblk_buf.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + ringbuffer.c + 1 + ..\..\..\components\drivers\ipc\ringbuffer.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + waitqueue.c + 1 + ..\..\..\components\drivers\ipc\waitqueue.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + workqueue.c + 1 + ..\..\..\components\drivers\ipc\workqueue.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + dev_pin.c + 1 + ..\..\..\components\drivers\pin\dev_pin.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + dev_serial.c + 1 + ..\..\..\components\drivers\serial\dev_serial.c + + + + + + __RT_IPC_SOURCE__ + + + + + + + + + + + Drivers + + + drv_gpio.c + 1 + ..\libraries\HAL_Drivers\drivers\drv_gpio.c + + + + + drv_usart.c + 1 + ..\libraries\HAL_Drivers\drivers\drv_usart.c + + + + + drv_common.c + 1 + ..\libraries\HAL_Drivers\drv_common.c + + + + + startup_stm32g030xx.s + 2 + ..\libraries\STM32G0xx_HAL\CMSIS\Device\ST\STM32G0xx\Source\Templates\arm\startup_stm32g030xx.s + + + + + stm32g0xx_hal_msp.c + 1 + board\CubeMX_Config\Src\stm32g0xx_hal_msp.c + + + + + board.c + 1 + board\board.c + + + + + Finsh + + + cmd.c + 1 + ..\..\..\components\finsh\cmd.c + + + + + msh_parse.c + 1 + ..\..\..\components\finsh\msh_parse.c + + + + + msh.c + 1 + ..\..\..\components\finsh\msh.c + + + + + shell.c + 1 + ..\..\..\components\finsh\shell.c + + + + + Kernel + + + clock.c + 1 + ..\..\..\src\clock.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + components.c + 1 + ..\..\..\src\components.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + cpu_up.c + 1 + ..\..\..\src\cpu_up.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + defunct.c + 1 + ..\..\..\src\defunct.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + idle.c + 1 + ..\..\..\src\idle.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + ipc.c + 1 + ..\..\..\src\ipc.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + irq.c + 1 + ..\..\..\src\irq.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + kservice.c + 1 + ..\..\..\src\kservice.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + mem.c + 1 + ..\..\..\src\mem.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + mempool.c + 1 + ..\..\..\src\mempool.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + object.c + 1 + ..\..\..\src\object.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + scheduler_comm.c + 1 + ..\..\..\src\scheduler_comm.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + scheduler_up.c + 1 + ..\..\..\src\scheduler_up.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + thread.c + 1 + ..\..\..\src\thread.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + timer.c + 1 + ..\..\..\src\timer.c + + + + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + klibc + + + kstdio.c + 1 + ..\..\..\src\klibc\kstdio.c + + + + + kerrno.c + 1 + ..\..\..\src\klibc\kerrno.c + + + + + kstring.c + 1 + ..\..\..\src\klibc\kstring.c + + + + + libcpu + + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + + + + + showmem.c + 1 + ..\..\..\libcpu\arm\common\showmem.c + + + + + context_rvds.S + 2 + ..\..\..\libcpu\arm\cortex-m0\context_rvds.S + + + + + cpuport.c + 1 + ..\..\..\libcpu\arm\cortex-m0\cpuport.c + + + + + Libraries + + + stm32g0xx_hal_rcc_ex.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c + + + + + system_stm32g0xx.c + 1 + ..\libraries\STM32G0xx_HAL\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c + + + + + stm32g0xx_hal_rcc.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c + + + + + stm32g0xx_hal_cec.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cec.c + + + + + stm32g0xx_hal_dma_ex.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c + + + + + stm32g0xx_hal_uart_ex.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c + + + + + stm32g0xx_hal_flash_ex.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c + + + + + stm32g0xx_hal_gpio.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c + + + + + stm32g0xx_ll_usart.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usart.c + + + + + stm32g0xx_hal_pwr_ex.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c + + + + + stm32g0xx_hal_uart.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c + + + + + stm32g0xx_hal_flash.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c + + + + + stm32g0xx_hal_usart_ex.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_usart_ex.c + + + + + stm32g0xx_hal.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c + + + + + stm32g0xx_hal_cortex.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c + + + + + stm32g0xx_hal_dma.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c + + + + + stm32g0xx_hal_pwr.c + 1 + ..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c + + + + + + + + + + + + + + + <Project Info> + + + + + + 0 + 1 + + + + diff --git a/bsp/stm32/stm32g030-tiny-board/rtconfig.h b/bsp/stm32/stm32g030-tiny-board/rtconfig.h new file mode 100644 index 00000000000..a9d664c795b --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/rtconfig.h @@ -0,0 +1,395 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +#define SOC_STM32G030RB +#define BOARD_STM32G030_TINY_BOARD + +/* RT-Thread Kernel */ + +/* klibc options */ + +/* rt_vsnprintf options */ + +#define RT_KLIBC_USING_LIBC_VSNPRINTF +/* end of rt_vsnprintf options */ + +/* rt_vsscanf options */ + +#define RT_KLIBC_USING_LIBC_VSSCANF +/* end of rt_vsscanf options */ + +/* rt_memset options */ + +/* end of rt_memset options */ + +/* rt_memcpy options */ + +/* end of rt_memcpy options */ + +/* rt_memmove options */ + +/* end of rt_memmove options */ + +/* rt_memcmp options */ + +/* end of rt_memcmp options */ + +/* rt_strstr options */ + +/* end of rt_strstr options */ + +/* rt_strcasecmp options */ + +/* end of rt_strcasecmp options */ + +/* rt_strncpy options */ + +/* end of rt_strncpy options */ + +/* rt_strcpy options */ + +/* end of rt_strcpy options */ + +/* rt_strncmp options */ + +/* end of rt_strncmp options */ + +/* rt_strcmp options */ + +/* end of rt_strcmp options */ + +/* rt_strlen options */ + +/* end of rt_strlen options */ + +/* rt_strnlen options */ + +/* end of rt_strnlen options */ +/* end of klibc options */ +#define RT_NAME_MAX 8 +#define RT_CPUS_NR 1 +#define RT_ALIGN_SIZE 8 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 1000 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_HOOK_USING_FUNC_PTR +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 + +/* kservice options */ + +/* end of kservice options */ +#define RT_USING_DEBUG +#define RT_DEBUGING_ASSERT +#define RT_DEBUGING_COLOR +#define RT_DEBUGING_CONTEXT + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE +/* end of Inter-Thread communication */ + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_SMALL_MEM_AS_HEAP +#define RT_USING_HEAP +/* end of Memory Management */ +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "uart1" +#define RT_VER_NUM 0x50200 +#define RT_BACKTRACE_LEVEL_MAX_NR 32 +/* end of RT-Thread Kernel */ +#define ARCH_ARM +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M0 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 1024 +#define RT_MAIN_THREAD_PRIORITY 10 +#define RT_USING_MSH +#define RT_USING_FINSH +#define FINSH_USING_MSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 768 +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_CMD_SIZE 80 +#define MSH_USING_BUILT_IN_COMMANDS +#define FINSH_USING_DESCRIPTION +#define FINSH_ARG_MAX 10 +#define FINSH_USING_OPTION_COMPLETION + +/* DFS: device virtual file system */ + +/* end of DFS: device virtual file system */ + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_UNAMED_PIPE_NUMBER 64 +#define RT_USING_SERIAL +#define RT_USING_SERIAL_V1 +#define RT_SERIAL_USING_DMA +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN +/* end of Device Drivers */ + +/* C/C++ and POSIX layer */ + +/* ISO-ANSI C layer */ + +/* Timezone and Daylight Saving Time */ + +#define RT_LIBC_USING_LIGHT_TZ_DST +#define RT_LIBC_TZ_DEFAULT_HOUR 8 +#define RT_LIBC_TZ_DEFAULT_MIN 0 +#define RT_LIBC_TZ_DEFAULT_SEC 0 +/* end of Timezone and Daylight Saving Time */ +/* end of ISO-ANSI C layer */ + +/* POSIX (Portable Operating System Interface) layer */ + + +/* Interprocess Communication (IPC) */ + + +/* Socket is in the 'Network' category */ + +/* end of Interprocess Communication (IPC) */ +/* end of POSIX (Portable Operating System Interface) layer */ +/* end of C/C++ and POSIX layer */ + +/* Network */ + +/* end of Network */ + +/* Memory protection */ + +/* end of Memory protection */ + +/* Utilities */ + +/* end of Utilities */ + +/* Using USB legacy version */ + +/* end of Using USB legacy version */ +/* end of RT-Thread Components */ + +/* RT-Thread Utestcases */ + +/* end of RT-Thread Utestcases */ + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + +/* end of Marvell WiFi */ + +/* Wiced WiFi */ + +/* end of Wiced WiFi */ + +/* CYW43012 WiFi */ + +/* end of CYW43012 WiFi */ + +/* BL808 WiFi */ + +/* end of BL808 WiFi */ + +/* CYW43439 WiFi */ + +/* end of CYW43439 WiFi */ +/* end of Wi-Fi */ + +/* IoT Cloud */ + +/* end of IoT Cloud */ +/* end of IoT - internet of things */ + +/* security packages */ + +/* end of security packages */ + +/* language packages */ + +/* JSON: JavaScript Object Notation, a lightweight data-interchange format */ + +/* end of JSON: JavaScript Object Notation, a lightweight data-interchange format */ + +/* XML: Extensible Markup Language */ + +/* end of XML: Extensible Markup Language */ +/* end of language packages */ + +/* multimedia packages */ + +/* LVGL: powerful and easy-to-use embedded GUI library */ + +/* end of LVGL: powerful and easy-to-use embedded GUI library */ + +/* u8g2: a monochrome graphic library */ + +/* end of u8g2: a monochrome graphic library */ +/* end of multimedia packages */ + +/* tools packages */ + +/* end of tools packages */ + +/* system packages */ + +/* enhanced kernel services */ + +/* end of enhanced kernel services */ + +/* acceleration: Assembly language or algorithmic acceleration packages */ + +/* end of acceleration: Assembly language or algorithmic acceleration packages */ + +/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */ + +/* end of CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */ + +/* Micrium: Micrium software products porting for RT-Thread */ + +/* end of Micrium: Micrium software products porting for RT-Thread */ +/* end of system packages */ + +/* peripheral libraries and drivers */ + +/* HAL & SDK Drivers */ + +/* STM32 HAL & SDK Drivers */ + +/* end of STM32 HAL & SDK Drivers */ + +/* Infineon HAL Packages */ + +/* end of Infineon HAL Packages */ + +/* Kendryte SDK */ + +/* end of Kendryte SDK */ +/* end of HAL & SDK Drivers */ + +/* sensors drivers */ + +/* end of sensors drivers */ + +/* touch drivers */ + +/* end of touch drivers */ +/* end of peripheral libraries and drivers */ + +/* AI packages */ + +/* end of AI packages */ + +/* Signal Processing and Control Algorithm Packages */ + +/* end of Signal Processing and Control Algorithm Packages */ + +/* miscellaneous packages */ + +/* project laboratory */ + +/* end of project laboratory */ + +/* samples: kernel and components samples */ + +/* end of samples: kernel and components samples */ + +/* entertainment: terminal games and other interesting software packages */ + +/* end of entertainment: terminal games and other interesting software packages */ +/* end of miscellaneous packages */ + +/* Arduino libraries */ + + +/* Projects and Demos */ + +/* end of Projects and Demos */ + +/* Sensors */ + +/* end of Sensors */ + +/* Display */ + +/* end of Display */ + +/* Timing */ + +/* end of Timing */ + +/* Data Processing */ + +/* end of Data Processing */ + +/* Data Storage */ + +/* Communication */ + +/* end of Communication */ + +/* Device Control */ + +/* end of Device Control */ + +/* Other */ + +/* end of Other */ + +/* Signal IO */ + +/* end of Signal IO */ + +/* Uncategorized */ + +/* end of Arduino libraries */ +/* end of RT-Thread online packages */ +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32G0 +#define BOARD_SERIES_STM32_NUCLEO_64 + +/* Hardware Drivers Config */ + +/* Onboard Peripheral Drivers */ + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_STM32_UART_V1_TX_TIMEOUT 2000 +#define BSP_USING_UART1 +/* end of On-chip Peripheral Drivers */ + +/* Board extended module Drivers */ + +/* end of Hardware Drivers Config */ + +#endif diff --git a/bsp/stm32/stm32g030-tiny-board/rtconfig.py b/bsp/stm32/stm32g030-tiny-board/rtconfig.py new file mode 100644 index 00000000000..9b8d8076e01 --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/rtconfig.py @@ -0,0 +1,184 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m0' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iccarm' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.3' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m0 -mthumb -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M0 ' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'armclang': + # toolchains + CC = 'armclang' + CXX = 'armclang' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M0 ' + CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-m0 ' + CFLAGS += ' -mcpu=cortex-m0 ' + CFLAGS += ' -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar ' + CFLAGS += ' -gdwarf-3 -ffunction-sections ' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers ' + LFLAGS += ' --list rt-thread.map ' + LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" ' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib' + + EXEC_PATH += '/ARM/ARMCLANG/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O1' # armclang recommend + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iccarm': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M0' + CFLAGS += ' -e' + CFLAGS += ' --fpu=None' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M0' + AFLAGS += ' --fpu None' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' + +def dist_handle(BSP_ROOT, dist_dir): + import sys + cwd_path = os.getcwd() + sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools')) + from sdk_dist import dist_do_building + dist_do_building(BSP_ROOT, dist_dir) diff --git a/bsp/stm32/stm32g030-tiny-board/template.uvoptx b/bsp/stm32/stm32g030-tiny-board/template.uvoptx new file mode 100644 index 00000000000..3320299dfdb --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/template.uvoptx @@ -0,0 +1,192 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 8000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32G0xx_64 -FS08000000 -FL010000 -FP0($$Device:STM32G030C8Tx$CMSIS\Flash\STM32G0xx_64.FLM)) + + + 0 + ST-LINKIII-KEIL_SWO + -UG -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("") -D00(00000000) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32G0xx_64.FLM -FS08000000 -FL010000 -FP0($$Device:STM32G030C8Tx$CMSIS\Flash\STM32G0xx_64.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32g030-tiny-board/template.uvprojx b/bsp/stm32/stm32g030-tiny-board/template.uvprojx new file mode 100644 index 00000000000..6f6f5acaa8e --- /dev/null +++ b/bsp/stm32/stm32g030-tiny-board/template.uvprojx @@ -0,0 +1,411 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32G030C8Tx + STMicroelectronics + Keil.STM32G0xx_DFP.1.2.0 + https://www.keil.com/pack/ + IRAM(0x20000000,0x00002000) IROM(0x08000000,0x00010000) CPUTYPE("Cortex-M0+") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32G0xx_64 -FS08000000 -FL010000 -FP0($$Device:STM32G030C8Tx$CMSIS\Flash\STM32G0xx_64.FLM)) + 0 + $$Device:STM32G030C8Tx$Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0xx.h + + + + + + + + + + $$Device:STM32G030C8Tx$CMSIS\SVD\STM32G030.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 0 + 0 + 0 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP-MPU + DARMCM1.DLL + -pCM0+ + SARMCM3.DLL + -MPU + TARMCM1.DLL + -pCM0+ + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M0+" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x2000 + + + 1 + 0x8000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x10000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x2000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 4 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Source Group 1 + + + + + + + + + + + + + + + <Project Info> + + + + + + 0 + 1 + + + + +