From a2a4dd6d22ff0188b0fcce478f4df205f85bb940 Mon Sep 17 00:00:00 2001
From: CYFS <2805686936@qq.com>
Date: Wed, 10 Sep 2025 10:55:08 +0800
Subject: [PATCH] add ra2a1 drvices

---
 bsp/renesas/ra2a1-ek/board/Kconfig | 177 +++++++++++++++++++++++++++++
 1 file changed, 177 insertions(+)

diff --git a/bsp/renesas/ra2a1-ek/board/Kconfig b/bsp/renesas/ra2a1-ek/board/Kconfig
index c5c31871ebc..7ef62b3e5e1 100644
--- a/bsp/renesas/ra2a1-ek/board/Kconfig
+++ b/bsp/renesas/ra2a1-ek/board/Kconfig
@@ -96,7 +96,184 @@ menu "Hardware Drivers Config"
                             default 0
                     endif
             endif
+        
+        menuconfig BSP_USING_SCI
+            bool "Enable SCI Controller"
+            default n
+            config BSP_USING_SCIn_SPI
+                bool
+                depends on BSP_USING_SCI
+                select RT_USING_SPI
+                default n
 
+            config BSP_USING_SCIn_I2C
+                bool
+                depends on BSP_USING_SCI
+                select RT_USING_I2C
+                default n
+
+            config BSP_USING_SCIn_UART
+                bool
+                depends on BSP_USING_SCI
+                select RT_USING_SERIAL
+                select RT_USING_SERIAL_V2
+                default n
+
+            if BSP_USING_SCI
+                config BSP_USING_SCI0
+                    bool "Enable SCI0"
+                    default n
+                    if BSP_USING_SCI0
+                        choice
+                        prompt "choice sci mode"
+                        default BSP_USING_SCI0_SPI
+                        config BSP_USING_SCI0_SPI
+                            select BSP_USING_SCIn_SPI
+                            bool "SPI mode"
+                        config BSP_USING_SCI0_I2C
+                            select BSP_USING_SCIn_I2C
+                            bool "I2C mode"
+                        config BSP_USING_SCI0_UART
+                            select BSP_USING_SCIn_UART
+                            bool "UART mode"
+                        endchoice
+                        if BSP_USING_SCI0_UART
+                            config BSP_SCI0_UART_RX_BUFSIZE
+                                int "Set UART0 RX buffer size"
+                                range 64 65535
+                                depends on RT_USING_SERIAL_V2
+                                default 256
+
+                            config BSP_SCI0_UART_TX_BUFSIZE
+                                int "Set UART0 TX buffer size"
+                                range 0 65535
+                                depends on RT_USING_SERIAL_V2
+                                default 0
+                        endif
+                    endif
+                config BSP_USING_SCI1
+                    bool "Enable SCI1"
+                    default n
+                    if BSP_USING_SCI1
+                        choice
+                        prompt "choice sci mode"
+                        default BSP_USING_SCI1_SPI
+                        config BSP_USING_SCI1_SPI
+                            select BSP_USING_SCIn_SPI
+                            bool "SPI mode"
+                        config BSP_USING_SCI1_I2C
+                            select BSP_USING_SCIn_I2C
+                            bool "I2C mode"
+                        config BSP_USING_SCI1_UART
+                            select BSP_USING_SCIn_UART
+                            bool "UART mode"
+                        endchoice
+                        if BSP_USING_SCI1_UART
+                            config BSP_SCI1_UART_RX_BUFSIZE
+                                int "Set UART1 RX buffer size"
+                                range 64 65535
+                                depends on RT_USING_SERIAL_V2
+                                default 256
+
+                            config BSP_SCI1_UART_TX_BUFSIZE
+                                int "Set UART1 TX buffer size"
+                                range 0 65535
+                                depends on RT_USING_SERIAL_V2
+                                default 0
+                        endif
+                    endif
+               
+                config BSP_USING_SCI9
+                    bool "Enable SCI9"
+                    default n
+                    if BSP_USING_SCI9
+                        choice
+                        prompt "choice sci mode"
+                        default BSP_USING_SCI9_SPI
+                        config BSP_USING_SCI9_SPI
+                            select BSP_USING_SCIn_SPI
+                            bool "SPI mode"
+                        config BSP_USING_SCI9_I2C
+                            select BSP_USING_SCIn_I2C
+                            bool "I2C mode"
+                        config BSP_USING_SCI9_UART
+                            select BSP_USING_SCIn_UART
+                            bool "UART mode"
+                        endchoice
+                        if BSP_USING_SCI9_UART
+                            config BSP_SCI9_UART_RX_BUFSIZE
+                                int "Set UART9 RX buffer size"
+                                range 64 65535
+                                depends on RT_USING_SERIAL_V2
+                                default 256
+
+                            config BSP_SCI9_UART_TX_BUFSIZE
+                                int "Set UART9 TX buffer size"
+                                range 0 65535
+                                depends on RT_USING_SERIAL_V2
+                                default 0
+                        endif
+                    endif
+            endif
+    
+        menuconfig BSP_USING_HW_I2C
+            bool "Enable hardware I2C BUS"
+            default n
+            if BSP_USING_HW_I2C
+                config BSP_USING_HW_I2C0
+                    bool "Enable Hardware I2C0 BUS"
+                    default n
+                config BSP_USING_HW_I2C1
+                    bool "Enable Hardware I2C1 BUS"
+                    default n
+            endif
+
+        menuconfig BSP_USING_PWM
+            bool "Enable PWM"
+            default n
+            select RT_USING_PWM
+            if BSP_USING_PWM
+                config BSP_USING_PWM0
+                    bool "Enable GPT0 (32-Bits) output PWM"
+                    default n
+
+                config BSP_USING_PWM1
+                    bool "Enable GPT1 (32-Bits) output PWM"
+                    default n
+
+                config BSP_USING_PWM2
+                    bool "Enable GPT2 (32-Bits) output PWM"
+                    default n
+
+                config BSP_USING_PWM3
+                    bool "Enable GPT3 (32-Bits) output PWM"
+                    default n
+
+                config BSP_USING_PWM4
+                    bool "Enable GPT4 (32-Bits) output PWM"
+                    default n
+
+                config BSP_USING_PWM5
+                    bool "Enable GPT5 (32-Bits) output PWM"
+                    default n
+
+                config BSP_USING_PWM6
+                    bool "Enable GPT6 (32-Bits) output PWM"
+                    default n
+            endif
+
+        menuconfig BSP_USING_SPI
+            bool "Enable SPI BUS"
+            default n
+            select RT_USING_SPI
+            if BSP_USING_SPI
+                config BSP_USING_SPI0
+                    bool "Enable SPI0 BUS"
+                    default n
+                config BSP_USING_SPI1
+                    bool "Enable SPI1 BUS"
+                    default n
+            endif
     endmenu
 
     menu "Board extended module Drivers"