Added SME basic examples

Added examples for:
-rgb study
-user button study
-sme initialization result

Author: fontamiHw

hardware/AMEL/samd/libraries/SME_basic/examples/blinkRGB/blinkRGB.ino

@@ -0,0 +1,52 @@
+/*
+ Shows How to use the SmartEverything RGB Led
+
+ created 14 Jun 2015
+ by Mik (smkk@amel-tech.com)
+ */
+
+
+  int i = 0;
+
+void setup() {
+  LED_GREEN_INIT;
+  LED_BLUE_INIT;
+  LED_RED_INIT;
+  pinMode(PIN_LED_RXL, OUTPUT);
+  pinMode(PIN_LED_TXL, OUTPUT);
+
+}
+
+void loop() {;
+
+  switch (i) {
+    case 0:
+      i++;
+      LED_GREEN_ON(HIGH);
+      break;
+
+    case 1:
+      i++;
+      LED_RED_ON(HIGH);
+      break;
+
+    case 2:
+      i = 0;
+      LED_BLUE_ON(HIGH);
+      break;
+
+    default:
+      break;
+  }
+  digitalWrite(PIN_LED_RXL, LOW);
+  digitalWrite(PIN_LED_TXL, LOW);
+  delay(100);
+
+
+  LED_GREEN_ON(LOW);
+  LED_BLUE_ON(LOW);
+  LED_RED_ON(LOW);
+  digitalWrite(PIN_LED_RXL, HIGH);
+  digitalWrite(PIN_LED_TXL, HIGH);
+  delay(100);
+}

hardware/AMEL/samd/libraries/SME_basic/examples/initializationResult/initializationResult.ino

@@ -0,0 +1,67 @@
+/*
+ Shows The result of the sme initialization phase
+
+ created 16 Jun 2015
+ by Mik (smkk@amel-tech.com)
+ */
+
+#include <Arduino.h>
+
+void setup() {
+    SerialUSB.begin(115200);
+}
+
+void loop() {
+
+  SerialUSB.print("SmartEverything initialization = ");
+
+  if (smeInitError == 0){
+    SerialUSB.println("SUCCEED !");
+    LED_GREEN_ON(HIGH);
+  }    
+  else {
+    SerialUSB.println("ERROR !");
+    //         // ERROR !!!!!!! FLASH EVERYTHING
+
+        pinMode(PIN_LED_RXL, OUTPUT);
+        pinMode(PIN_LED_TXL, OUTPUT);
+        int i=0;
+
+        while(1){
+            switch (i) {
+                case 0:
+                i++;
+                LED_GREEN_ON(HIGH);
+                break;
+
+                case 1:
+                i++;
+                LED_RED_ON(HIGH);
+                break;
+
+                case 2:
+                i=0;
+                LED_BLUE_ON(HIGH);
+                break;
+
+                default:
+                break;
+            }
+            digitalWrite(PIN_LED_RXL, LOW);
+            digitalWrite(PIN_LED_TXL, LOW);
+            delay(100);
+
+
+            LED_GREEN_ON(LOW);
+            LED_BLUE_ON(LOW);
+            LED_RED_ON(LOW);
+            digitalWrite(PIN_LED_RXL, HIGH);
+            digitalWrite(PIN_LED_TXL, HIGH);
+            delay(100);
+        };
+  }    
+
+    delay(2000);
+
+}
+

hardware/AMEL/samd/libraries/SME_basic/examples/userButton/userButton.ino

@@ -0,0 +1,36 @@
+/*
+* userButton.ino
+*
+* Example to sohws how the 2 userbutton works on Smarteverything
+*
+* Created: 6/17/2015 10:32:11 PM
+*
+*  Author: Mik
+*
+*/
+
+#include <Arduino.h>
+
+
+// the setup function runs once when you press reset or power the board
+void setup() {
+
+    // LED & User Button are already initilized by the SME core.
+    // it is not required to do here
+}
+
+// the loop function runs over and over again forever
+void loop() {
+
+    if (button1IsPressed()) {
+        LED_BLUE_ON(HIGH);
+    } else {
+        LED_BLUE_ON(LOW);
+    }
+
+    if (button2IsPressed()) {
+        LED_RED_ON(HIGH);
+    } else {
+        LED_RED_ON(LOW);
+    }
+}