fixed Spell check

Author: marqdevx

docs/readme.md

@@ -50,7 +50,7 @@ Constructor of the object
 MKRIoTCarrier yourName; //In the examples we name it as *carrier*
 ```
 
-Intialization example sketch
+Initialization example sketch
 
 ```cpp
 #include <Arduino_MKRIoTCarrier.h>
@@ -97,7 +97,7 @@ Init the calaibration and the set up for the touchable pads (Already done in the
 ```cpp
 Buttons.begin()
 ```
-Read the state of the pads and save them to be analize in the diferent type of touch events
+Read the state of the pads and save them to be analyze in the different type of touch events
 ```cpp
 Buttons.update()
 ```
@@ -126,7 +126,7 @@ Get both, touched and released
 ButtonX.onTouchChange()
 ```
 
-In case you have another enclosure you can change the sensivity of the pads, 3-100
+In case you have another enclosure you can change the sensitivity of the pads, 3-100
 Automatically configured when you set the `CARRIER_CASE` boolean, by default is false (sensitivity threshold 4)
 
 ```cpp

examples/All_Features/All_Features.ino

@@ -53,7 +53,7 @@ void loop() {
   //Simple relay open and close loop
   /*  Relay function
      open()  - goes to Normally Open (NO) circuit, status LED will be ON
-     close() - goes to Normally Close (NC) cirucit, status LED will be OFF
+     close() - goes to Normally Close (NC) circuit, status LED will be OFF
   */
   carrier.Relay1.close();
   delay(1000);

examples/TouchPads/TouchTypes/TouchTypes.ino

@@ -1,7 +1,7 @@
 /*
   Arduino_Qtouch - Sensor data read Example
   This example shows how to configure and read data
-  from touch sensors bottons on MKR IoT Carrier and
+  from touch sensors buttons on MKR IoT Carrier and
   prints updates to the Serial Monitor.
 
   The circuit:

examples/TouchPads/getTouch/getTouch.ino

@@ -1,7 +1,7 @@
 /*
   Arduino_Qtouch - Sensor data read Example
   This example shows how to configure and read data
-  from touch sensors bottons on MKR IoT Carrier and
+  from touch sensors buttons on MKR IoT Carrier and
   prints updates to the Serial Monitor.
 
   The circuit:

library.properties

@@ -3,7 +3,7 @@ version=1.0.0
 author=Riccardo Rizzo, Jose García, Pablo Marquínez
 maintainer=Arduino <info@arduino.cc>
 sentence=Controlling the IoT MKR Carrier
-paragraph=Allows you to controll all the components included in the Explore IoT Kit
+paragraph=Allows you to control all the components included in the Explore IoT Kit
 category=Sensors + Relays
 url=https://github.com/arduino-libraries/Arduino_MKRIoTCarrier
 architectures=samd

src/Arduino_MKRIoTCarrier_Qtouch.h

@@ -64,7 +64,7 @@ class MKRIoTCarrierQtouch{
 
     //Config
     bool setOnChange = false;       //Touch on change
-    bool setOnNormal = false;       //Allways read
+    bool setOnNormal = false;       //Always read
     bool setOnUp = false;           //When the pad is not being touched
     bool setOnDown = false;         //When is pressed, to make 2 Downs you need to touch it, release it and touch it again
 };