Moes AM43-0.45/40-ES-EB: Add Battery Entity

[nicknol]

Description of the issue

The Roller blind/shades drive motor Moes AM43-0.45/40-ES-EB shows battery information in Zigbee2MQTT.
But there is no battery entity in Home Assistant.

Addon version

v2.6.2-1

Platform

Home Assistant OS
Core 2025.10.4
Supervisor 2025.10.0
Operating System 16.2
Frontend 20251001.4

Logs of the issue (if applicable)

No response

[Koenkk]

I don't see it exposing battery.

The Roller blind/shades drive motor Moes AM43-0.45/40-ES-EB shows battery information in Zigbee2MQTT.

can you provide a screenshot of this?

[nicknol]

[Koenkk]

Could you try to re-configure the device and provide the debug log of that, afterwards restart z2m.

See this on how to enable debug logging.

[nicknol]

Please find the lines from the debug log, the device in question is "Rollo (1Z)":

7.11.2025, 11:21:52] z2m: Device 'Rollo (1Z)' left the network
[7.11.2025, 11:21:53] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"Rollo (1Z)","ieee_address":"0x0ceff6fffecb202a"},"type":"device_leave"}'
[7.11.2025, 11:21:53] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (15Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":255,"energy":1558,"indicator_mode":"off/on","linkquality":144,"power":58,"power_outage_memory":"restore","state":"ON","update":{"installed_version":1946234881,"latest_version":1946234881,"state":"idle"},"voltage":234}'
[7.11.2025, 11:21:53] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Bewegung (2Z)', payload '{"battery":100,"fading_time":30,"humidity":null,"humidity_calibration":null,"illuminance":2865,"illuminance_interval":1,"indicator":"OFF","linkquality":216,"motion_detection_sensitivity":14,"presence":false,"temperature":null,"temperature_calibration":null,"temperature_unit":"celsius"}'
[7.11.2025, 11:21:55] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (28Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":0,"energy":12.71,"indicator_mode":"off/on","linkquality":144,"power":0,"power_outage_memory":"restore","state":"ON","update":{"installed_version":192,"latest_version":192,"state":"idle"},"voltage":228}'
[7.11.2025, 11:21:55] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (15Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":255,"energy":1558,"indicator_mode":"off/on","linkquality":144,"power":57,"power_outage_memory":"restore","state":"ON","update":{"installed_version":1946234881,"latest_version":1946234881,"state":"idle"},"voltage":234}'
[7.11.2025, 11:21:56] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Bewegung (7Z)', payload '{"brightness":216,"color":{"x":0.466,"y":0.378},"color_mode":"xy","effect":null,"illuminance":56,"level_config":{"on_level":"previous"},"linkquality":156,"occupancy":false,"power_on_behavior":"previous","state":"ON","update":{"installed_version":86,"latest_version":86,"state":"idle"}}'
[7.11.2025, 11:21:57] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (18Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":0,"energy":82.77,"indicator_mode":"off/on","linkquality":255,"power":0,"power_outage_memory":"restore","state":"ON","update":{"installed_version":192,"latest_version":192,"state":"idle"},"voltage":229}'
[7.11.2025, 11:21:57] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (25Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":0,"energy":74.97,"indicator_mode":"off/on","linkquality":255,"power":0,"power_outage_memory":"on","state":"ON","update":{"installed_version":192,"latest_version":192,"state":"idle"},"voltage":229}'
[7.11.2025, 11:21:57] zh:controller: Interview for '0x0ceff6fffecb202a' started
[7.11.2025, 11:21:57] z2m: Device 'Rollo (1Z)' joined
[7.11.2025, 11:21:59] z2m: Starting interview of 'Rollo (1Z)'
[7.11.2025, 11:21:59] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"Rollo (1Z)","ieee_address":"0x0ceff6fffecb202a"},"type":"device_joined"}'
[7.11.2025, 11:21:59] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"Rollo (1Z)","ieee_address":"0x0ceff6fffecb202a","status":"started"},"type":"device_interview"}'
[7.11.2025, 11:21:59] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"Rollo (1Z)","ieee_address":"0x0ceff6fffecb202a"},"type":"device_announce"}'
[7.11.2025, 11:21:59] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Bewegung (9Z)', payload '{"brightness":216,"color":{"x":0.466,"y":0.378},"color_mode":"xy","effect":null,"illuminance":32,"linkquality":255,"occupancy":false,"power_on_behavior":"previous","state":"OFF","update":{"installed_version":86,"latest_version":86,"state":"idle"}}'
[7.11.2025, 11:21:59] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (11Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":0,"energy":11.43,"indicator_mode":"off/on","linkquality":144,"power":0,"power_outage_memory":"restore","state":"ON","update":{"installed_version":192,"latest_version":192,"state":"idle"},"voltage":229}'
[7.11.2025, 11:21:59] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Repeater (1Z)', payload '{"linkquality":144}'
[7.11.2025, 11:22:00] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (11Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":0,"energy":11.43,"indicator_mode":"off/on","linkquality":144,"power":0,"power_outage_memory":"restore","state":"ON","update":{"installed_version":192,"latest_version":192,"state":"idle"},"voltage":229}'
[7.11.2025, 11:22:01] zh:controller: Succesfully interviewed '0x0ceff6fffecb202a'
[7.11.2025, 11:22:01] z2m: Successfully interviewed 'Rollo (1Z)', device has successfully been paired
[7.11.2025, 11:22:01] z2m: Device 'Rollo (1Z)' is supported, identified as: Moes Roller blind/shades drive motor (AM43-0.45/40-ES-EB)
[7.11.2025, 11:22:01] z2m: Configuring 'Rollo (1Z)'
[7.11.2025, 11:22:01] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"definition":{"description":"Roller blind/shades drive motor","exposes":[{"features":[{"access":3,"label":"State","name":"state","property":"state","type":"enum","values":["OPEN","CLOSE","STOP"]},{"access":3,"description":"Position of this cover","label":"Position","name":"position","property":"position","type":"numeric","unit":"%","value_max":100,"value_min":0}],"type":"cover"},{"access":3,"description":"Set the motor direction","label":"Motor direction","name":"motor_direction","property":"motor_direction","type":"enum","values":["normal","reversed"]},{"access":3,"description":"Motor speed","label":"Motor speed","name":"motor_speed","property":"motor_speed","type":"numeric","unit":"rpm","value_max":255,"value_min":0},{"access":3,"description":"Opening mode","label":"Opening mode","name":"opening_mode","property":"opening_mode","type":"enum","values":["tilt","lift"]},{"access":2,"description":"Set the upper limit, to reset limits use factory_reset","label":"Set upper limit","name":"set_upper_limit","property":"set_upper_limit","type":"enum","values":["SET"]},{"access":2,"description":"Set the bottom limit, to reset limits use factory_reset","label":"Set bottom limit","name":"set_bottom_limit","property":"set_bottom_limit","type":"enum","values":["SET"]},{"access":2,"description":"Factory reset the device","label":"Factory reset","name":"factory_reset","property":"factory_reset","type":"binary","value_off":false,"value_on":true},{"access":1,"category":"diagnostic","description":"Link quality (signal strength)","label":"Linkquality","name":"linkquality","property":"linkquality","type":"numeric","unit":"lqi","value_max":255,"value_min":0}],"model":"AM43-0.45/40-ES-EB","options":[],"source":"native","supports_ota":false,"vendor":"Moes"},"friendly_name":"Rollo (1Z)","ieee_address":"0x0ceff6fffecb202a","status":"successful","supported":true},"type":"device_interview"}'
[7.11.2025, 11:22:01] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (31Z)', payload '{"ac_frequency":50,"current":0,"energy":4.32,"linkquality":255,"power":0.2,"power_factor":0.04,"power_on_behavior":"previous","state":"ON","update":{"installed_version":268513378,"latest_version":268513378,"state":"idle"},"voltage":231.5}'
[7.11.2025, 11:22:01] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (15Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":255,"energy":1558,"indicator_mode":"off/on","linkquality":144,"power":58,"power_outage_memory":"restore","state":"ON","update":{"installed_version":1946234881,"latest_version":1946234881,"state":"idle"},"voltage":234}'
[7.11.2025, 11:22:01] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Steckdose (15Z)', payload '{"child_lock":"UNLOCK","countdown":0,"current":251,"energy":1558,"indicator_mode":"off/on","linkquality":144,"power":58,"power_outage_memory":"restore","state":"ON","update":{"installed_version":1946234881,"latest_version":1946234881,"state":"idle"},"voltage":234}'
[7.11.2025, 11:22:02] z2m: Successfully configured 'Rollo (1Z)'

[Koenkk]

• Could you now provide the data/database.db entry of this device?
• Does this device have a battery?

[nicknol]

Please find the database entry:

{"id":200,"type":"EndDevice","ieeeAddr":"0x0ceff6fffecb202a","nwkAddr":34297,"manufId":4098,"manufName":"_TZE200_icka1clh","powerSource":"Battery","modelId":"TS0601","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":81,"inClusterList":[0,4,5,61184],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"65503":"ђ�0fђ�0\u0012Ғ�0\u0012","65506":31,"65508":0,"65534":0,"modelId":"TS0601","manufacturerName":"_TZE200_icka1clh","stackVersion":0,"dateCode":"","zclVersion":3,"appVersion":65,"powerSource":3}}},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":65,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"interviewState":"SUCCESSFUL","meta":{"configured":332242049},"lastSeen":1762553984796}

and yes, the device has a battery. it could charged via Solar panel (part of the delivery) or via a charger (as well part of the delivery)

[Koenkk]

Currently we don't have the datapoint for the battery, we might be able to reverse engineer it by observing the debug logs for 24 hours and see if we get a Datapoint XX not defined for '_TZE200_icka1clh, can you checkt this?

See this on how to enable debug logging.

[nicknol]

I ran Z2M for 24+h in debug mode and created a log file of about 1GB. Unfortunately the string we were looking for is not contained:

[Koenkk]

In that case we need to figure out the datapoints using the Tuya bridge: guide

[nicknol]

I looked at the guide, and I have to admit that I have neither a tuya bridge nor a tuya account. the latter could be sorted, but the former is difficult.

[github-actions]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days