nvim-lua · alberthydev · Jul 17, 2025 · Jul 17, 2025
diff --git a/README.md b/README.md
@@ -1,23 +1,13 @@
-# kickstart.nvim
+# n-ide.nvim
 
-## Introduction
-
-A starting point for Neovim that is:
-
-* Small
-* Single-file
-* Completely Documented
-
-**NOT** a Neovim distribution, but instead a starting point for your configuration.
+This is my Neovim configuration for using it as an IDE. It’s forked from kickstart.nvim. Feel free to use it however you like, but I strongly recommend checking out the kickstart.nvim repository to build your own setup, it’s very easy to get started and understand.
 
 ## Installation
 
 ### Install Neovim
 
-Kickstart.nvim targets *only* the latest
-['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest
-['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim.
-If you are experiencing issues, please make sure you have the latest versions.
+This was built to be used on an Arch-based distro. I have no intention of porting it to other operating systems. If you are using a different environment, I highly recommend checking out the kickstart.nvim repository — they support Windows, macOS, and other Linux distributions.
+(It will probably work on any popular modern distro as long as you meet the requirements listed below.)
 
 ### Install External Dependencies
 
@@ -26,75 +16,28 @@ External Requirements:
 - [ripgrep](https://github.com/BurntSushi/ripgrep#installation),
   [fd-find](https://github.com/sharkdp/fd#installation)
 - Clipboard tool (xclip/xsel/win32yank or other depending on the platform)
-- A [Nerd Font](https://www.nerdfonts.com/): optional, provides various icons
-  - if you have it set `vim.g.have_nerd_font` in `init.lua` to true
-- Emoji fonts (Ubuntu only, and only if you want emoji!) `sudo apt install fonts-noto-color-emoji`
+- A [Nerd Font](https://www.nerdfonts.com/): optional, this can be turned off easily 
 - Language Setup:
   - If you want to write Typescript, you need `npm`
   - If you want to write Golang, you will need `go`
   - etc.
 
-> [!NOTE]
-> See [Install Recipes](#Install-Recipes) for additional Windows and Linux specific notes
-> and quick install snippets
+#### Arch Requeriments
+
+```
+sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim
+```
 
 ### Install Kickstart
 
 > [!NOTE]
 > [Backup](#FAQ) your previous configuration (if any exists)
 
-Neovim's configurations are located under the following paths, depending on your OS:
-
-| OS | PATH |
-| :- | :--- |
-| Linux, MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
-| Windows (cmd)| `%localappdata%\nvim\` |
-| Windows (powershell)| `$env:LOCALAPPDATA\nvim\` |
-
-#### Recommended Step
-
-[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo
-so that you have your own copy that you can modify, then install by cloning the
-fork to your machine using one of the commands below, depending on your OS.
-
-> [!NOTE]
-> Your fork's URL will be something like this:
-> `https://github.com/<your_github_username>/kickstart.nvim.git`
-
-You likely want to remove `lazy-lock.json` from your fork's `.gitignore` file
-too - it's ignored in the kickstart repo to make maintenance easier, but it's
-[recommended to track it in version control](https://lazy.folke.io/usage/lockfile).
-
 #### Clone kickstart.nvim
 
-> [!NOTE]
-> If following the recommended step above (i.e., forking the repo), replace
-> `nvim-lua` with `<your_github_username>` in the commands below
-
-<details><summary> Linux and Mac </summary>
-
 ```sh
 git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim
 ```
-
-</details>
-
-<details><summary> Windows </summary>
-
-If you're using `cmd.exe`:
-
-```
-git clone https://github.com/nvim-lua/kickstart.nvim.git "%localappdata%\nvim"
-```
-
-If you're using `powershell.exe`
-
-```
-git clone https://github.com/nvim-lua/kickstart.nvim.git "${env:LOCALAPPDATA}\nvim"
-```
-
-</details>
-
 ### Post Installation
 
 Start Neovim
@@ -106,20 +49,6 @@ nvim
 That's it! Lazy will install all the plugins you have. Use `:Lazy` to view
 the current plugin status. Hit `q` to close the window.
 
-#### Read The Friendly Documentation
-
-Read through the `init.lua` file in your configuration folder for more
-information about extending and exploring Neovim. That also includes
-examples of adding popularly requested plugins.
-
-> [!NOTE]
-> For more information about a particular plugin check its repository's documentation.
-
-
-### Getting Started
-
-[The Only Video You Need to Get Started with Neovim](https://youtu.be/m8C0Cq9Uv9o)
-
 ### FAQ
 
 * What should I do if I already have a pre-existing Neovim configuration?
@@ -139,103 +68,3 @@ examples of adding popularly requested plugins.
     distribution that you would like to try out.
 * What if I want to "uninstall" this configuration:
   * See [lazy.nvim uninstall](https://lazy.folke.io/usage#-uninstalling) information
-* Why is the kickstart `init.lua` a single file? Wouldn't it make sense to split it into multiple files?
-  * The main purpose of kickstart is to serve as a teaching tool and a reference
-    configuration that someone can easily use to `git clone` as a basis for their own.
-    As you progress in learning Neovim and Lua, you might consider splitting `init.lua`
-    into smaller parts. A fork of kickstart that does this while maintaining the
-    same functionality is available here:
-    * [kickstart-modular.nvim](https://github.com/dam9000/kickstart-modular.nvim)
-  * Discussions on this topic can be found here:
-    * [Restructure the configuration](https://github.com/nvim-lua/kickstart.nvim/issues/218)
-    * [Reorganize init.lua into a multi-file setup](https://github.com/nvim-lua/kickstart.nvim/pull/473)
-
-### Install Recipes
-
-Below you can find OS specific install instructions for Neovim and dependencies.
-
-After installing all the dependencies continue with the [Install Kickstart](#Install-Kickstart) step.
-
-#### Windows Installation
-
-<details><summary>Windows with Microsoft C++ Build Tools and CMake</summary>
-Installation may require installing build tools and updating the run command for `telescope-fzf-native`
-
-See `telescope-fzf-native` documentation for [more details](https://github.com/nvim-telescope/telescope-fzf-native.nvim#installation)
-
-This requires:
-
-- Install CMake and the Microsoft C++ Build Tools on Windows
-
-```lua
-{'nvim-telescope/telescope-fzf-native.nvim', build = 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build' }
-```
-</details>
-<details><summary>Windows with gcc/make using chocolatey</summary>
-Alternatively, one can install gcc and make which don't require changing the config,
-the easiest way is to use choco:
-
-1. install [chocolatey](https://chocolatey.org/install)
-either follow the instructions on the page or use winget,
-run in cmd as **admin**:
-```
-winget install --accept-source-agreements chocolatey.chocolatey
-```
-
-2. install all requirements using choco, exit the previous cmd and
-open a new one so that choco path is set, and run in cmd as **admin**:
-```
-choco install -y neovim git ripgrep wget fd unzip gzip mingw make
-```
-</details>
-<details><summary>WSL (Windows Subsystem for Linux)</summary>
-
-```
-wsl --install
-wsl
-sudo add-apt-repository ppa:neovim-ppa/unstable -y
-sudo apt update
-sudo apt install make gcc ripgrep unzip git xclip neovim
-```
-</details>
-
-#### Linux Install
-<details><summary>Ubuntu Install Steps</summary>
-
-```
-sudo add-apt-repository ppa:neovim-ppa/unstable -y
-sudo apt update
-sudo apt install make gcc ripgrep unzip git xclip neovim
-```
-</details>
-<details><summary>Debian Install Steps</summary>
-
-```
-sudo apt update
-sudo apt install make gcc ripgrep unzip git xclip curl
-
-# Now we install nvim
-curl -LO https://github.com/neovim/neovim/releases/latest/download/nvim-linux-x86_64.tar.gz
-sudo rm -rf /opt/nvim-linux-x86_64
-sudo mkdir -p /opt/nvim-linux-x86_64
-sudo chmod a+rX /opt/nvim-linux-x86_64
-sudo tar -C /opt -xzf nvim-linux-x86_64.tar.gz
-
-# make it available in /usr/local/bin, distro installs to /usr/bin
-sudo ln -sf /opt/nvim-linux-x86_64/bin/nvim /usr/local/bin/
-```
-</details>
-<details><summary>Fedora Install Steps</summary>
-
-```
-sudo dnf install -y gcc make git ripgrep fd-find unzip neovim
-```
-</details>
-
-<details><summary>Arch Install Steps</summary>
-
-```
-sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim
-```
-</details>
-
diff --git a/init.lua b/init.lua
@@ -91,7 +91,7 @@ vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
 -- Set to true if you have a Nerd Font installed and selected in the terminal
-vim.g.have_nerd_font = false
+vim.g.have_nerd_font = true
 
 -- [[ Setting options ]]
 -- See `:help vim.o`
@@ -894,7 +894,7 @@ require('lazy').setup({
       -- Load the colorscheme here.
       -- Like many other themes, this one has different styles, and you could load
       -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
-      vim.cmd.colorscheme 'tokyonight-night'
+      vim.cmd.colorscheme 'rose-pine-moon'
     end,
   },
 
@@ -984,7 +984,7 @@ require('lazy').setup({
   --    This is the easiest way to modularize your config.
   --
   --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
-  -- { import = 'custom.plugins' },
+  { import = 'custom.plugins' },
   --
   -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec`
   -- Or use telescope!

diff --git a/lazy-lock.json b/lazy-lock.json
@@ -0,0 +1,26 @@
+{
+  "LuaSnip": { "branch": "master", "commit": "458560534a73f7f8d7a11a146c801db00b081df0" },
+  "blink.cmp": { "branch": "main", "commit": "586ee87534f5bf65f1c8dea2d1da2a57e8cddd36" },
+  "conform.nvim": { "branch": "master", "commit": "973f3cb73887d510321653044791d7937c7ec0fa" },
+  "fidget.nvim": { "branch": "main", "commit": "d9ba6b7bfe29b3119a610892af67602641da778e" },
+  "gitsigns.nvim": { "branch": "main", "commit": "0cb5a7753d3c4b8e9cfdc9d88d9110cb8d4b1544" },
+  "guess-indent.nvim": { "branch": "main", "commit": "84a4987ff36798c2fc1169cbaff67960aed9776f" },
+  "lazy.nvim": { "branch": "main", "commit": "6c3bda4aca61a13a9c63f1c1d1b16b9d3be90d7a" },
+  "lazydev.nvim": { "branch": "main", "commit": "2367a6c0a01eb9edb0464731cc0fb61ed9ab9d2c" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "a9c876d72d82b6640266f8b248ac05a63630b1d9" },
+  "mason-tool-installer.nvim": { "branch": "main", "commit": "517ef5994ef9d6b738322664d5fdd948f0fdeb46" },
+  "mason.nvim": { "branch": "main", "commit": "8024d64e1330b86044fed4c8494ef3dcd483a67c" },
+  "mini.nvim": { "branch": "main", "commit": "7504a87ca0500bdf71f89ffacd77851d71378635" },
+  "nvim-lspconfig": { "branch": "master", "commit": "dbfd8da6206b4ab0e2fe9b72a538f82e2b410102" },
+  "nvim-treesitter": { "branch": "master", "commit": "42fc28ba918343ebfd5565147a42a26580579482" },
+  "nvim-web-devicons": { "branch": "master", "commit": "0422a19d9aa3aad2c7e5cca167e5407b13407a9d" },
+  "plenary.nvim": { "branch": "master", "commit": "857c5ac632080dba10aae49dba902ce3abf91b35" },
+  "rose-pine": { "branch": "main", "commit": "f93360149e9ed4df8677fbb07c7231ea0fd03b97" },
+  "telescope-fzf-native.nvim": { "branch": "main", "commit": "1f08ed60cafc8f6168b72b80be2b2ea149813e55" },
+  "telescope-ui-select.nvim": { "branch": "master", "commit": "6e51d7da30bd139a6950adf2a47fda6df9fa06d2" },
+  "telescope.nvim": { "branch": "master", "commit": "b4da76be54691e854d3e0e02c36b0245f945c2c7" },
+  "todo-comments.nvim": { "branch": "main", "commit": "304a8d204ee787d2544d8bc23cd38d2f929e7cc5" },
+  "toggleterm.nvim": { "branch": "main", "commit": "50ea089fc548917cc3cc16b46a8211833b9e3c7c" },
+  "tokyonight.nvim": { "branch": "main", "commit": "057ef5d260c1931f1dffd0f052c685dcd14100a3" },
+  "which-key.nvim": { "branch": "main", "commit": "370ec46f710e058c9c1646273e6b225acf47cbed" }
+}
diff --git a/lua/custom/plugins/init.lua b/lua/custom/plugins/init.lua
@@ -2,4 +2,32 @@
 --  I promise not to create any merge conflicts in this directory :)
 --
 -- See the kickstart.nvim README for more information
-return {}
+return {
+  {
+    'rose-pine/neovim',
+    name = 'rose-pine',
+  },
+  {
+    'akinsho/toggleterm.nvim',
+    version = '*',
+    opts = {
+      direction = 'float',
+      open_mapping = [[<leader>ç]],
+      float_opts = {
+        border = 'curved',
+        highlights = {
+          border = 'Normal',
+          background = 'Normal',
+        },
+      },
+      start_in_insert = true,
+      autochdir = true,
+      insert_mappings = true,
+      terminal_mappings = true,
+      shade_terminals = false,
+      persist_size = true,
+      close_on_exit = true,
+      shell = vim.o.shell,
+    },
+  },
+}